44gr of H414 or W760 with a 85-87gr, is the ducks nuts in two 243's i load for. Fine tune the seating depth to suit the barrel of course
Liked On: 04-04-2022, 09:52 PM
Everybody around here seems to have the extra special discount switch, and I'm sure they'll be doing the same going forward :XD:
Liked On: 04-04-2022, 09:43 PM
Yeah. Govt at the time took $50 million extra when they made a mistake with the diesel ute rego. Wouldn't give it back after admitting it was wrong. Must be some real bastards in the govt...
Liked On: 04-04-2022, 09:42 PM
sounds like good times indeed : ) That left hand drive RX7 would be worth a mint now!
Liked On: 02-04-2022, 09:42 PM
94775
Liked On: 23-03-2022, 10:09 PM
NZDA has been great for me including Auckland, now Taranaki. As a member there was never a day charge for the range. Doubt there is one now but correct me if I'm wrong. If the day charge is for none...
Liked On: 23-03-2022, 10:06 PM
Or they wont.... I will never pay that much just for the principal of it all. I suspect it will leave a sour taste in punters mouths and they will go elsewhere.
Liked On: 23-03-2022, 10:04 PM
excellent post - wouldn't be embarrassed mate - I think its real common for guys to have a small circle of friends, and if you move away from school mates you kinder end up with work mates and not...
Liked On: 23-03-2022, 10:03 PM
Anything is better than leaving them to rot in a field or the bush. I get it if you're shooting large numbers for population control or have venison coming out your ears, but for the average hunter...
Liked On: 23-03-2022, 09:58 PM
1) Coat leg roast with olive oil, then a generous rub with cinnamon/cumin/coriander powder plus salt and pepper. 2) Throw in to oven bag with some chopped garlic and a few more splashes of olive...
Liked On: 23-03-2022, 09:57 PM
Mate, that would be a lifes worth of hunting for me......UNREAL.....
Liked On: 22-03-2022, 07:40 PM
I wouldn't deliberately be trying to shift the police, despite what people think. Treat it the same as any transaction and go to the source before going behind their backs.
Liked On: 22-03-2022, 05:44 PM
I use the clamp section of a pipe flaring tool to grip the projectile through the loading press die hole and have disassembled many loaded rounds with ease.
Liked On: 19-03-2022, 10:46 AM
Galvanic corrosion between dissimilar materials often causes the projectiles to “ stick” in the brass over time The trick to getting them apart is put them in a seating die and seat them 5 thou...
Liked On: 19-03-2022, 10:44 AM
Pull the bullets in your press use bike tube between your vice grips to protect the projectile.
Liked On: 19-03-2022, 10:44 AM