Thanks guys , but I am in Taranaki , cheers Yeap was thinking hose it down outside , maybe kill the rust liquid , and then wirebrush wheels on grinder & then paint it black , need a chalking...
Liked On: 12-02-2017, 08:32 AM
After you've buried the stash again I always leave a few pieces of toilet paper around the disturbed soil......puts most people off digging I'd suspect :thumbsup:
Liked On: 28-01-2017, 08:55 AM
One time the mrs and I made a baby. Actually it was two times.
Liked On: 06-01-2017, 07:50 AM
Treated myself. Wanted to add another Ripi Knife to my set. ( have a nice drop point, skinner and now this(bird and trout??)) Thanks for a great knife john worthington. Steel is N690 SS, cant...
Liked On: 06-12-2016, 05:20 PM
here are a couple i just finished just because[ATTACH=CONFIG]59403[/ATTACH ]stag and water buff horn and ringed giddgee on the skinner cheers john
Liked On: 22-11-2016, 09:46 PM
As homebrew357 would attest too, things can get hot in the brewing world. And any woman will also tell you that when yeast get to much heat...it's not a good thing. So to prevent my beer from...
Liked On: 28-10-2016, 04:19 PM
As an alternative to watching crap TV with the wife over the last two winters I've put in a few hours making leather bits and pieces. Keen to see if anyone else out there is doing anything...
Liked On: 04-10-2016, 12:24 PM
Joshjameskiwibushman has a couple of good videos on stuff to take. Im a bit of a gear nerd and can waste hours watchn gear videos Sent from my SM-G388F using Tapatalk
Liked On: 04-09-2016, 09:43 PM
Ok so here is an old curved skinner. My mother in law died recently and when we were cleaning out the house I came across it, rusted and forgotten, amongst my father-in-law's tools. I figure it could...
Liked On: 28-08-2016, 04:15 PM
http://i1279.photobucket.com/albums/y525/Cobra_Rattler_556/DSCN1023_zpsc7c888bd.jpg From the Pakistan/Afghan Border. The handle is camel bone and the blade was made from a Russian Gaz Leafspring.
Liked On: 27-08-2016, 12:01 PM
Fashioned after a Ghurka Kukri?
Liked On: 27-08-2016, 12:00 PM
I shot my first animal using a 2 blade rage broadhead yesterday. 54195 The goat was about 15m away and I'm shooting a reasonably fast 70lb bow. The arrow went clean through and stuck into the...
Liked On: 22-08-2016, 05:51 PM
Other makers are putting out supposedly faster this, sharper that and bigger this, but until they make my life as easy as my iPhones do they arent going to get a look in. I've tried them but they...
Liked On: 21-08-2016, 09:16 AM
iPhone bro, done my time with shit android crap.
Liked On: 21-08-2016, 09:16 AM
Quality steel, great blade that maintains its edge, the humble Svord Peasent knife is HARD to beat- made right here in New Zealand(nope I don't work for them)
Liked On: 17-08-2016, 09:07 AM