Finally back together and ready for some load development Saturday morning. Zastava action with 1-7.5t 6mm rem barrel. Stock work done by the late Howard Lopdell. One beautiful peice of walnut...
Liked On: 24-05-2024, 02:52 AM
I was running a touch late to work the other day and the young fulla asked if he could come. Why not, something different for an 8 year old and it was not going to be super strenuous. Sometimes in...
Liked On: 17-05-2024, 04:28 PM
3 shot groups under MOA are suitable for a hunting load for out 300m on deer sized game. A lot reloaders are happy with that and successfully fill the freezer. Precision reloading & development is...
Liked On: 12-05-2024, 04:44 PM
I can fire a 3 shot group of say .5moa in my 7rm{3 shots touching} but if 5 shots the group always opens up a bit with barrel and suppressor heating up. But if i fire 3 shots then let barrel and...
Liked On: 12-05-2024, 04:44 PM
Picked up quite a bit of walnut from custom rifle stock blanks on a recent trip away and have spent an afternoon cutting it into knife handle blocks. Majority 60-70mm x 35mm x 130mm with a few at 60...
Liked On: 10-05-2024, 08:09 AM
A Wapiti Hunter for a very big man so had to make the handle a 1/2 in longer than normal to suit his hands. A nice set of spalted Hackberry scales with snake knot lanyard over curve backed buffalo...
Liked On: 10-05-2024, 08:09 AM
Is the water cooled annealer dead? Been making flux concentrator ones and they go much better. The first one runs on a 36V power supply and the second one uses a 48V power supply. Apart from that...
Liked On: 08-05-2024, 05:06 PM
Update: I went into the bush for three days. Bush bashed pretty hard. Stock got wet & very cold. Paint job held up really well, with no signs of wear. Didn’t help shoot a sika though, so there is...
Liked On: 06-05-2024, 03:26 PM
Yes. It is the best powder for short barrels. Don't overlook Power Pro Varmint in a longer barrel though if you are chasing speed
Liked On: 02-05-2024, 08:57 AM
It's more about bullet choice and shot placement. A good light jacket match or varmint bullet handloaded to the max your barrel will allow and it will kill just fine. 130gr is a bit on the heavy side...
Liked On: 01-05-2024, 01:26 PM
Delivered these two heads back to Padox today. 247900 247901
Liked On: 22-04-2024, 12:45 PM
Well the deer were elusive this very wet weekend but used the opportunity to test the Targex 120gr HP rebated boat tail hunter projectiles on soft targets. Also tested a few Nosler 90gr balistic...
Liked On: 21-04-2024, 10:24 AM
I've fitted quite a few for customers. Ken's Sig stock knuckles can be fitted to the std elude stock. 245909 245910 245911 245912
Liked On: 28-03-2024, 09:27 PM
In another post referencing both these primers I said I would do a little test to compare them. I did that at a range today, shooting a couple of my usual loads in a Sako M591 .243W and Tikka T3...
Liked On: 09-03-2024, 01:36 AM
For all those with chassis and those that want them. Have the bag riders done up. Come in at 30grams with the need cap screw. $60+post245272
Liked On: 06-03-2024, 09:20 PM