Well guys this bloody lock down bit is a bugger wearing out my shoes walking the dog , getting wood to keep the fire going. My lathe has packed a sad, broken gear in gear box so using it by hand. Yep...
Liked On: 15-09-2021, 02:53 PM
I have to admire your tenacity! That is lot of work without a milling slide, buggerizing around with packers and a dial gauge before you can make a cut! It just goes to show what can be done on a...
Liked On: 15-09-2021, 02:51 PM
https://youtu.be/6InMzOIo9iU Spring hare in South Canterbury with an overwhelming urge to fornicate and very little regard for self preservation.
Liked On: 14-09-2021, 10:01 AM
It's now carbon time! 177191 I was given a can of spray adhesive from the local carbon fibre chap when I was having a beer with him and asking silly questions. This made life bit easier with...
Liked On: 01-09-2021, 01:26 PM
https://www.silicagelproducts.co.nz/Silica-Gel-1Kg-Indicating-Bulk-Pack That's what you want. The containers from reloaders supplies are ideal to hold it. The silica gel that comes with the...
Liked On: 31-08-2021, 12:06 PM
Slight overkill but I have one kilo of silica gel in a fine mesh bag hanging from the door of the safe. I dry it out in the oven every 3 months. Works nicely.
Liked On: 31-08-2021, 12:06 PM
171231171232171231171233
Liked On: 30-06-2021, 03:53 PM
Just fitting an Anchutz .22lr barrel to a Baikal shotgun action and keeping it dead simple, not having auto extract I want to be able to load and seat bullet then eject manually, Almost finished...
Liked On: 30-06-2021, 03:53 PM
170906
Liked On: 25-06-2021, 09:24 AM
if you're going to make a strong room then definitely get temperature and humidity control in it and make sure it is well sealed against moisture ingress. Remember guns only have two enemies ...
Liked On: 25-06-2021, 09:13 AM
A 1950's Husky 1600 in 308, with a decent 4x scope, weighs in about 7lb.
Liked On: 07-06-2021, 11:53 AM
Step fourteen Recoil pad Remember how I mentioned a piece of flat fibreglass plate earlier? Well some more of that is required for fitting the recoil pad. I cut and trimmed a piece so it...
Liked On: 03-06-2021, 11:14 PM
Step fifteen Pimp it out! So now you have your stock basically done. Only thing to do now is give it some colour! I got lazy and rattle canned mine with some Matt Black Wattyl Kill Rust epoxy...
Liked On: 03-06-2021, 11:14 PM
I always use the TBR reading straight from the rangefinder then you dont have to worry about entering angles into shooter that way. The lower angles wont make a huge difference but out in the real...
Liked On: 27-05-2021, 10:19 AM
Tuesday morning went for a 7am hunt along a local river amongst willows trees and grass.Clear skys,no duck shooters around,no breeze at all.Looked in a few small sand pits,amongst willows,found a...
Liked On: 11-05-2021, 10:54 AM