So in your bedroom, on the wallpaper above the headboard you have ......sheep, ? :D
Liked On: 14-05-2018, 06:59 PM
As a new CM convert, I can say they are easy to load for and get a "good load going". I havent experimented much but really havent needed to. Rifle came with 130 ELDM's but I didnt really cotton on...
Liked On: 14-05-2018, 06:33 PM
I'd go 140gr +. They maybe slower than 120gr but they will be better in wind, and wind is generally the problem at longer range especially if you have a good consistent load that doesn't have to much...
Liked On: 14-05-2018, 06:32 PM
Yep, go 140gn and up if you can.
Liked On: 14-05-2018, 06:32 PM
Heavy equals better BC which equals a more slippery bullet that is less effected by wind and carries more energy at long range...
Liked On: 14-05-2018, 06:32 PM
Be interested in this too as just started loading for one. Always thought heavier was better providing it has a good bc.
Liked On: 14-05-2018, 06:31 PM
I saw your youtube vid on it earlier. I'd be going 143 eld, heavier and high bc always wins out past 500 odd yards
Liked On: 14-05-2018, 06:31 PM
Put it in a calculator and have a look :D
Liked On: 14-05-2018, 06:31 PM
Also had trouble disassembling a tikka bolt the other day. Turns out the dovetailed collar that the handle slides through was severely corroded. Oil and elbow grease was the winning formula. The...
Liked On: 12-05-2018, 09:23 PM
I was gonna say that isn't my old T3 SlimySquirrel? But you said it's 6.5CM so no :-)
Liked On: 12-05-2018, 09:22 PM
I knew if I started spraypainting #27GANG on people's fences at night it would catch on sooner or later
Liked On: 12-05-2018, 06:56 PM
Yeah without removing the shroud from bolt first as 25/06 mentioned ned
Liked On: 12-05-2018, 10:51 AM
I don't think his bolt is stuck, sounds like he is trying to take the handle off the bolt (to replace with a different handle).
Liked On: 12-05-2018, 10:51 AM
time for a gunsmith maybe . . . what caliber ? good luck . . . R
Liked On: 12-05-2018, 10:51 AM
You tube bolt disassembly need to take shroud off first Sent from my SM-G920I using Tapatalk
Liked On: 12-05-2018, 10:50 AM