The lee collet neck die + redding body die is my preferred way to load rounds. Much gentler on the brass and much less run out than using a normal die with an expander ball. Cheap as well. Add a...
Liked On: 20-07-2015, 10:06 PM
Yep, you can use the Lee Collet for multiple rifles, as you aren't setting up the die for headspace as you would with a F/L. If you can, don't get the F/L, get the Redding Body die instead when you...
Liked On: 20-07-2015, 10:05 PM
first off...check scope bases, I ve been caught out twice in 2 years by them working loose, next screw tension all over, check them all, then do it again.if no joy, chuck another scope on, try that
Liked On: 20-07-2015, 08:47 PM
Will have to chop the barrel to suppress is the only downside, which would be a shame, that brake won't just come off. You'll go hunting a few times and be quite impressed, but then start finding it...
Liked On: 20-07-2015, 02:00 PM
I was at the range again on friday arvo and had a guy with a .308 on my left and another guy had his new .270 on the right of me none of them suppressed. When the .270 went off you could feel the...
Liked On: 20-07-2015, 01:27 PM
The whole legal case in the UK that got them legalised was based on health concerns about hearing loss. They do work and work well if you get a good one.
Liked On: 20-07-2015, 01:27 PM
What?
Liked On: 20-07-2015, 01:26 PM
The older generation are largely stone deaf. As are all their hunting dogs.
Liked On: 20-07-2015, 01:26 PM
No it's not. 1 shot without a supressor makes my ears ring like fuck.
Liked On: 20-07-2015, 01:24 PM
"Lame is something that costs more than a howa or cheap shotgun." ... Ummm ... I was going to write a lengthy response but with statements like that where do I start? As for trying to...
Liked On: 20-07-2015, 01:23 PM
Here's the thing with weight ... It adds up. "It's not much in the over all package" can be said for almost all of the parts of your gun. Anyone who has tried to make a light set up will...
Liked On: 20-07-2015, 01:22 PM
The reason I stopped at 23.4 is because there wasn't enough neck tension to hold the bullet against the compressed load with 24gr. At 2.160 oal they would seat but checking the next day they would...
Liked On: 20-07-2015, 01:20 PM
this is in a 223 for what it's worth 60 gr hornady 25gr 2208 2850fps shifted to 2206h for 3050 with the same grain loading, trialing 2207 20 grains next. Mix of ppu, winchester and Remington and...
Liked On: 20-07-2015, 01:19 PM
I'm trying to develop a load for 75gr Amax's in my 223 with 2208. 2208 is the same as Varget which is better suited for heavier bullets in 223 (or 222), I was getting between 2750 and 2850 with...
Liked On: 19-07-2015, 09:43 PM
I found 2008 was slower but more accurate than 2206H
Liked On: 18-07-2015, 09:25 PM