superdiver
Member

1665 Likes

Page 104 of 111 First ... 45490919293949596979899100101102103104105106107108109110111 Last

• Jump to page:

1. 
   superdiver liked post by stagstalker On thread : 7mm SAUM, WSM, Blaser Magnum, Rem Mag and 284 Superpig Discussion

   Pretty sure my loads with winchester brass measure about .314 - .315

   Liked On: 02-03-2019, 10:58 PM

2. 
   superdiver liked post by r87mm On thread : 7mm SAUM, WSM, Blaser Magnum, Rem Mag and 284 Superpig Discussion

   Have you check the primers are seated properly? I had the same thing happen to me recently. Sized they fitted but loaded they didn't. Turns out a new cartridge to me and even though same brand of...

   Liked On: 02-03-2019, 10:58 PM

3. 
   superdiver liked post by GWH On thread : 7mm SAUM, WSM, Blaser Magnum, Rem Mag and 284 Superpig Discussion

   Yes and a lot less ongoing hassle Sent from my SM-G930P using Tapatalk

   Liked On: 02-03-2019, 09:49 AM

4. 
   superdiver liked post by chainsaw On thread : 7mm SAUM, WSM, Blaser Magnum, Rem Mag and 284 Superpig Discussion

   My 284 loads measure .314 - 315 with Nosler brass and 0.315-316 with Norma. Haven’t measured any Winchester brass but have some so can check

   Liked On: 02-03-2019, 09:26 AM

5. 
   superdiver liked post by cameronjackwhite On thread : 7mm SAUM, WSM, Blaser Magnum, Rem Mag and 284 Superpig Discussion

   Try something like a vld 140? A couple of guys run them in their 284s on here. They didn't work in mine I had the opposite throating situation

   Liked On: 01-03-2019, 08:20 PM

6. 
   superdiver liked post by GWH On thread : new toy

   wow really, seems fast for a 180 from a 280AI, more like 7mm Blaser Mag velocity. My hunting mate had a 280AI built with a 24" barrel, he could only push a 162gr at 2900 (accurately). He was never...

   Liked On: 27-02-2019, 10:36 PM

7. 
   superdiver liked post by stevodog On thread : new toy

   280ai is a bit of an open country specialist. Best with 24plus inches and can be a bit much without brake or suppressor for some. (me) 20inch suppressed 284? I'm thinking about a long action...

   Liked On: 27-02-2019, 10:32 PM

8. 
   superdiver liked post by Dorkus On thread : 7mmRM project

   22" barrel shouldn't cause problems for what you're hoping to do. I'm chucking a 186 Berger VLD @3050fps out of a 21.5" barrel. Win M70, 168VLD, Fed 215 primer, Norma brass and 74.5gn 2225

   Liked On: 27-02-2019, 07:58 PM

9. 
   superdiver liked post by stevodog On thread : Winchester Model 70 Ultimate Shadow

   I have a nice featherweight 308 for sale if it suits. 18inch suppressed.

   Liked On: 27-02-2019, 10:31 AM

10. 
    superdiver liked post by MSL On thread : MONTANA 1999

    Great chat

    Liked On: 27-02-2019, 10:29 AM

11. 
    superdiver liked post by 25/08IMP On thread : 7mm SAUM, WSM, Blaser Magnum, Rem Mag and 284 Superpig Discussion

    Looking good I'll be interesting to her how it goes. Sent from my SM-T350 using Tapatalk

    Liked On: 26-02-2019, 07:29 PM

12. 
    superdiver liked post by faregame On thread : Swaro Z5 vs Zeiss Conquest HD5

    V6 is the newer version for Zeiss Pretty much no HD5 left as new I’ve had both - like the turrets in Zeiss as full dialing Glass is tops on both to normal eyes - you would need both side by...

    Liked On: 25-02-2019, 04:18 PM

13. 
    superdiver liked post by Micky Duck On thread : Bullet jump 123 gr. SST in 6.5 Grendel

    "just under inch" leave it alone......

    Liked On: 23-02-2019, 10:17 PM

14. 
    superdiver liked post by stug On thread : Short 7mm08?

    My 7/08 has an 18" barrel. Lost about 200fps from a 24" barrel. But I handloaded with 125gr Nosler BT and they are doing 2950fps.

    Liked On: 21-02-2019, 08:07 PM

15. 
    superdiver liked post by 25/08IMP On thread : Reloader 17 load data for 284 Winchester

    You got yours up and running yet. I have a few 154 SST if you want to try them. Sent from my SM-G920I using Tapatalk

    Liked On: 21-02-2019, 03:20 PM

Page 104 of 111 First ... 45490919293949596979899100101102103104105106107108109110111 Last

• Jump to page: