superdiver
Member

1608 Likes

Page 80 of 108 First ... 306667686970717273747576777879808182838485868788899091929394 ... Last

• Jump to page:

1. 
   superdiver liked post by 25 /08 IMP On thread : 6.5x55ai light loads

   I load for a few Tikka .260 using Hodgdon superprofrmance and 143 ELDX 1 is an 18" the others are 20" all push over 2800fps loads are near max. Sent from my CPH1903 using Tapatalk

   Liked On: 05-01-2020, 09:25 PM

2. 
   superdiver liked post by 25 /08 IMP On thread : 6.5x55ai light loads

   Just shoot a standard .260 but you don't need a 26" barrel to get the speeds you are after. Sent from my CPH1903 using Tapatalk

   Liked On: 05-01-2020, 01:03 PM

3. 
   superdiver liked post by Bos On thread : Bit Of A Long Shot......but

   Thanks Tentman. PM sent And thanks to everyone else for their kind offers of a loan, and advice. The problem is that my grandson managed to get the case out of the die, but with the help of a vice...

   Liked On: 25-12-2019, 04:47 PM

4. 
   superdiver liked post by Ryan_Songhurst On thread : New .27 calibre, .277 Fury..

   126579

   Liked On: 25-12-2019, 04:43 PM

5. 
   superdiver liked post by stevodog On thread : Xmas venny

   Quick trip to kaimanawas this weekend. Spotted a gap in the roster and was ahead on home jobs so all good. Left Orkland at 2am and collected a speeding ticket on my way down. Had a couple of...

   Liked On: 22-12-2019, 11:46 PM

6. 
   superdiver liked post by muka88 On thread : 708-X Bolt 16 inch is slow

   I have heard that 120 nosler bt is really good in a short 7mm08 i will be trying them next year. My bush load is a 145 spear boattail doing 2500 opens up real nice

   Liked On: 16-12-2019, 09:37 PM

7. 
   superdiver liked post by muka88 On thread : 708-X Bolt 16 inch is slow

   That is farking slow im getting 2750 with 139 sst with 2206h. With sauer 100 7mm08 with a 16inch barrel 43gn rem brass Are you getting pressure?

   Liked On: 16-12-2019, 08:59 PM

8. 
   superdiver liked post by stevodog On thread : 708-X Bolt 16 inch is slow

   I use cfe223 in 308 and 8 x 57. I use 2208 in 708 and 350RM. I could use either/or for all but the loads are set and I can't be bothered changing. Like both these powders

   Liked On: 15-12-2019, 10:23 PM

9. 
   superdiver liked post by Gibo On thread : 7mm rem mag "superpig"

   Measured velocity means zip unless its validated :)

   Liked On: 15-12-2019, 03:25 PM

10. 
    superdiver liked post by Max Headroom On thread : Does a bull barrel help reduce throat erosion?

    I wonder if he thought the bull barrel would act as a kind of heat sink, and greatly delay the temp rise in the area of the throat.

    Liked On: 12-12-2019, 07:34 PM

11. 
    superdiver liked post by Flyblown On thread : best 7mm projectiles...bush to 600

    Yup @Gkp (https://www.nzhuntingandshooting.co.nz/member.php?u=8040) is on the money, you'll have to work out what's best for your rifle @Fisherman...

    Liked On: 10-12-2019, 06:14 PM

12. 
    superdiver liked post by stevodog On thread : 308 starter load suggestions?

    2206h or 2208. 2208 gives a bit more speed with the 165+. Cfe223 gives a bit more speed again and is what I use in 308 and 8x57.

    Liked On: 09-12-2019, 06:50 PM

13. 
    superdiver liked post by Bigash On thread : 308 starter load suggestions?

    My go to for 308 is adi 2208 and 168amax /eldm Sent from my iPhone using Tapatalk

    Liked On: 09-12-2019, 06:50 PM

14. 
    superdiver liked post by GWH On thread : best 7mm projectiles...bush to 600

    The 150gr SGK's will work great mate, if a rifle won't shoot them well, it wont shoot anything! And their terminal performance is great too. I've used them as a mag fir load over the years in my 7mm...

    Liked On: 09-12-2019, 06:37 PM

15. 
    superdiver liked post by stevodog On thread : best 7mm projectiles...bush to 600

    Nice if dual loads work out with reasonable POI change. 140s be better than 120s. I used 160gr speer btsp in 284 and using the same in 7RM. Also using the vari max..like it a lot

    Liked On: 09-12-2019, 06:35 PM

Page 80 of 108 First ... 306667686970717273747576777879808182838485868788899091929394 ... Last

• Jump to page: