It's a Jim Chambers English sporting rifle kit, with a L&R left handed round faced lock and Rice barrel. Chambers used their RH stock for the kit, but didn't inlet the lock. I'm happy with it -...
Liked On: 02-09-2021, 09:05 PM
Another benefit to the Short Action is that with a small amount of DIY you can lengthen the internal magazine box. Out of the box the rifle has a magazine block which is closer to SAAMI max length -...
Liked On: 01-09-2021, 02:29 PM
Laid this up over the last week. Tomorrow I'll see if it'll break open. Two options: A, I've made a mould for a howa mini action. B, I've entombed a howa stock in fiberglass. 176949
Liked On: 30-08-2021, 08:21 AM
Tentman will like this Done properly this time 176878
Liked On: 29-08-2021, 06:01 PM
2 tyres, chain, round gong, some concrete. Suspend a round gong inside the farther away tyre. Collect spalled lead with no digging required. Anchoring the tyres with some rebar pegs may be...
Liked On: 28-08-2021, 09:47 AM
have devised a little friendly forum shooting comp for the forum rules as follows 1 rimfire only 2 all targets shot at 50m or yards im not going to bitch about if its yards or meters so you are...
Liked On: 18-08-2021, 06:24 PM
Just keep it, I'll come down for a fossick through your gun cabinet when the new house is built. Tentman
Liked On: 06-08-2021, 11:56 PM
Hi all, Recently purchased a bit of an alternative calibre and thought I'd put it to the test on a tramp in the Tangihuas, being based in Northland. Lovely lever action Winchester Model 94AE....
Liked On: 06-08-2021, 09:44 PM
After employing the diy safari sling i saw on here to great effect i decided to add some of my own ideas. hammocks as a bush hunter i have found ive never had a problem finding 2 suitable trees to...
Liked On: 01-08-2021, 04:34 PM
Hi all, I’m Doug, 39 and from the UK- arrived in NZ just before lockdown and Christchurch based. Hadn’t done any hunting prior to coming here, went on a mission with a local and shot a .270 a few...
Liked On: 29-07-2021, 09:15 PM
It's been a couple of months since getting out for a proper hunt, so with the weather forecast looking good and a mate who'd not shot himself a deer in a couple of years, we headed out to try and...
Liked On: 26-07-2021, 10:25 AM
Send me the stock one day if you want and i’ll epoxy up the front and shape it
Liked On: 20-07-2021, 07:54 PM
Same load (55gn Gold Dot, 26gn 8208, 2.300") tried with different brass: PPU (fireformed, annealed, FL sized, trimmed, uniformed) 3245 3265 3293 3268 3293 3282
Liked On: 20-07-2021, 11:01 AM
Spent 6 nights on Stewart Island in March. Went to a less popular block on the NW circuit. All the typical info and approaches that people suggest did us well. Between the 4 of us we saw 8...
Liked On: 20-07-2021, 09:10 AM
if you do google search on cartridge there is link to castboolits.....follow nose around and will see link to 30/30 in contender and its an interesting read,the wee wadcutters look like a fun/useful...
Liked On: 17-07-2021, 09:21 PM