Old Indian proverb . . . He who eats the most venison eats the most hair . . .
Liked On: 03-10-2024, 09:21 PM
Thanks guys, yes these discussions often develop "tangents" both usefull and otherwise. Ranges are pretty constrained as to what they can offer, ours no exception, it isn't possible for us to do a...
Liked On: 03-10-2024, 04:12 PM
How bolt internals should be treated depends a bit on where you hunt . . . South Is tops in winter, run it very dry or it'll gum up. Elsewhere a very light wipe of a thin oil. After you've...
Liked On: 03-10-2024, 07:25 AM
How bolt internals should be treated depends a bit on where you hunt . . . South Is tops in winter, run it very dry or it'll gum up. Elsewhere a very light wipe of a thin oil. After you've...
Liked On: 03-10-2024, 12:04 AM
If you want to approach it scientifically with Brian Litz and Hornardy scientists instead of following the "I believe" crowd then be my guest. Yes the above data shows you were producing...
Liked On: 02-10-2024, 10:56 PM
If anything was likely to "kill off" the 7mmRM in NZ I'd pick the 6.5 PRC. You only have to watch the first part of Norway s new Ibex video to hear why. Extreme wind bucking with 156s at...
Liked On: 01-10-2024, 08:25 PM
As a long time horseman I'd recommend doing at least a dozen rides locally in the month before you go, the hour per visit to the stables it would take over that time would reward you handsomely.
Liked On: 01-10-2024, 08:02 AM
As a long time horseman I'd recommend doing at least a dozen rides locally in the month before you go, the hour per visit to the stables it would take over that time would reward you handsomely.
Liked On: 30-09-2024, 08:27 PM
As a long time horseman I'd recommend doing at least a dozen rides locally in the month before you go, the hour per visit to the stables it would take over that time would reward you handsomely.
Liked On: 30-09-2024, 07:41 PM
Hello folks Ive got an 18" 1:7 twist barrel. It was supposed to be headed to a 223 but I'm having second thoughts. My modelling shows a 22 Creedmoor will get 3050-3100 with 85/88s at the...
Liked On: 30-09-2024, 04:50 PM
Hello folks Ive got an 18" 1:7 twist barrel. It was supposed to be headed to a 223 but I'm having second thoughts. My modelling shows a 22 Creedmoor will get 3050-3100 with 85/88s at the...
Liked On: 30-09-2024, 01:18 PM
Go Barry Crump style and put detonators in spuds (potatoes)!
Liked On: 29-09-2024, 07:12 PM
I'd say it was a clean kill, the clue is in the delay (to bleed out internally from what is a pretty small wound) and the fact you didn't hear it on the ground. Wounded animals always make extra...
Liked On: 28-09-2024, 09:17 PM
If anything was likely to "kill off" the 7mmRM in NZ I'd pick the 6.5 PRC. You only have to watch the first part of Norway s new Ibex video to hear why. Extreme wind bucking with 156s at...
Liked On: 28-09-2024, 08:52 PM
It was too long as it was, giving it the chop improved it.
Liked On: 28-09-2024, 04:33 PM