Jake - here's a pic of a previous 2.8T Bighorn up in north Canterbury foothills. Bloke in the pic is gadgetman. Rimfire heaven there for many years - over 1000 bunnies per evening at times, plus the...
Liked On: 12-07-2022, 11:59 AM
Greetings bumblefoot and all, AR2206H (H4895) is currently my go to powder for my .223, .308 and .303 rIfles. In my T3x .223 25.5 grains with the 55 grain projectile gives 3,130 fps from the...
Liked On: 11-07-2022, 10:22 PM
Bill's point above also good to ponder. If you're on a budget - and who isn't - 4wding can be expensive with maintenance. Might cost 3-6k to mod a standard diesel truck depending on where you choose...
Liked On: 06-07-2022, 09:12 PM
Can I have the one this side of them please...lol Nice looking group tertle Good luck with sale
Liked On: 26-05-2022, 07:25 AM
We had thick fog until 9.30am opening morning, but still managed 3 limits on Parries and 2 of 3 limits on Mallards by 11am, so we were pretty happy with that. Was a different shoot this year with...
Liked On: 10-05-2022, 09:51 PM
I felt bad for the old girl missing out so I bought her along this opening after missing a few now . 4 dogs 2 golden labs my Brittany and the old heading dog. This heading dog use to be a bloody...
Liked On: 09-05-2022, 04:01 PM
At the rate things are going for small pistol primers. I'll be changing to small rifle primers for the glock.
Liked On: 13-02-2022, 04:27 PM
I was there this morning, they’re usually very competitive. Sent from my iPhone using Tapatalk
Liked On: 28-01-2022, 07:26 PM
https://www.equipoutdoors.co.nz/leatherman-wave-plus Sent from my iPhone using Tapatalk
Liked On: 28-01-2022, 07:26 PM
There’s Waikato Draught and a mug? I would have thought a good looking old bugger like me would have been in the first lot of deliveries. I think I’ll complain to the secretary. Ha ha ha ha. ...
Liked On: 03-09-2021, 09:46 PM
AR2213sc works just great... same rifle as yours... still working on accuracy use your 100grn for big game and keep your 90s for everything else. we decided after much head scratching to just use...
Liked On: 28-08-2021, 01:48 PM
Stuck case remover.
Liked On: 23-08-2021, 06:10 PM
Would still pay to find some way of fixing it permanently in place screws tend to shake loose when casting a lot, You need to watch the block alignment pins as well a couple of my moulds they have...
Liked On: 18-08-2021, 07:08 PM
Nope HP's are more accurate than solids all my HP moulds come with pins for both HP and solid and in every case the HP is more accurate the reason is the centre of gravity is moved more to the rear...
Liked On: 18-08-2021, 02:59 PM
My NOE moulds have a different setup for the HP I order the RG2 and RG4 style, And I never smoke them I give them a good cleaning in hot soapy water and heat them to 350 to 400 F and cool a couple...
Liked On: 18-08-2021, 02:53 PM