Three O'Three
Member

140 Likes

Page 7 of 10 First 12345678910 Last

• Jump to page:

1. 
   charliehorse liked post by Three O'Three On thread : Hornady seating die

   charliehorse dannyb I don't measure runout neither, I merely want bullets visibly straight, my lee die seats them a little crooked.

   Liked On: 16-03-2022, 06:40 AM

2. 
   dannyb liked post by Three O'Three On thread : Hornady seating die

   Thanks all. I'vebeen looking at youtube videos and other forums but nothing highly educational. I've been using a lee seating die but having runout problems, bought a lyman m die to help solve that...

   Liked On: 15-03-2022, 08:35 PM

3. 
   CBH Australia liked post by Three O'Three On thread : Eggington shepherds sharpening steel

   1000-6000grit stone by spartan siting on a jig I made to set angle of stone, not blade. I made a mistake in previous post, I don't hold knife at 90deg its horizontal at 180deg. Gerber and Smith...

   Liked On: 12-02-2022, 11:20 PM

4. 
   CBH Australia liked post by Three O'Three On thread : Eggington shepherds sharpening steel

   I got a diamond steel but I find it too abrasive for some knives. Have the Gerber pocket sharpener, its good, would love another one. Also have a strop, well its an old belt coated in cutting paste...

   Liked On: 12-02-2022, 08:15 PM

5. 
   CBH Australia liked post by Three O'Three On thread : Eggington shepherds sharpening steel

   What I meant was getting the angle right for any individual knife as in 17deg, 20deg 25deg. I can work out 90deg and 45deg but below 45 I can't workout. Also I'm far sighted so I can't see the blades...

   Liked On: 12-02-2022, 08:15 PM

6. 
   Micky Duck liked post by Three O'Three On thread : Eggington shepherds sharpening steel

   I've bought the small rabbiters style Edgington steel. Guy in the shop believed it would be great for my Victory knives. I had a play with it, works great on my victory and Knifekut knives, but a bit...

   Liked On: 12-02-2022, 04:46 PM

7. 
   CBH Australia liked post by Three O'Three On thread : Eggington shepherds sharpening steel

   I've bought the small rabbiters style Edgington steel. Guy in the shop believed it would be great for my Victory knives. I had a play with it, works great on my victory and Knifekut knives, but a bit...

   Liked On: 12-02-2022, 01:42 PM

8. 
   grunzter liked post by Three O'Three On thread : Greek .303

   After cleaning up the brass with wire wool and the Lee brass cleaning drill attachment and then inspecting the brass for damage, I'll probably discard 10% of brass. I have had one crack open when I...

   Liked On: 09-02-2022, 07:13 PM

9. 
   Ingrid 51 liked post by Three O'Three On thread : Greek .303

   After cleaning up the brass with wire wool and the Lee brass cleaning drill attachment and then inspecting the brass for damage, I'll probably discard 10% of brass. I have had one crack open when I...

   Liked On: 07-02-2022, 12:06 PM

10. 
    Micky Duck liked post by Three O'Three On thread : Ecinomical load development in a component drought.

    I've found if you do some research and read all the different reloading forums out there and see what majority of reloaders are doing with any given caliber, that's what's likely gonna work for you.

    Liked On: 30-01-2022, 07:11 PM

11. 
    RUMPY liked post by Three O'Three On thread : Scope adjustment issues

    No. Scope is mounted properly.

    Liked On: 29-12-2021, 07:07 PM

12. 
    zimmer liked post by Three O'Three On thread : Lee Collet Neck Dies - New "feature"

    zimmer. I welded a socket to the base of the presses handle to attach a torque wrench. No cam over on my press.

    Liked On: 29-10-2021, 07:41 AM

13. 
    300CALMAN liked post by Three O'Three On thread : Lee Collet Neck Dies - New "feature"

    zimmer. I welded a socket to the base of the presses handle to attach a torque wrench. No cam over on my press.

    Liked On: 28-10-2021, 11:55 PM

14. 
    Jhon liked post by Three O'Three On thread : Chamber ringing

    I need help understanding chamber ringing. There is info about it on the net but its all Americans practically writing novels about it on other forums and not using layman's term so I still don't...

    Liked On: 25-10-2021, 09:27 PM

15. 
    Woody liked post by Three O'Three On thread : Shoulder bump question

    Yeah keep neck sizing until they no longer chamber, then full or partial size, it'll work you brass less and help them last longer. I've neck sized the same brass half a dozen times and they still...

    Liked On: 17-10-2021, 04:20 PM

Page 7 of 10 First 12345678910 Last

• Jump to page: