Last night. 250 yards. 74 grn Targex. https://youtu.be/0kZFkwK45AU
Liked On: 23-06-2024, 10:53 AM
252611 Another one for the 75gr. High shoulder so finished with the knife. Didn't see the little nubs on his head otherwise he would still be alive.
Liked On: 23-06-2024, 10:50 AM
My Brother and I were off to check a new area this morning, and I decided to take along the new pup. Some years back we re-homed a pup that failed an element of its training for the prison service....
Liked On: 09-06-2024, 12:52 PM
Salomons are great boots. Straight out of the box comfortable. They dont last too long though.
Liked On: 08-06-2024, 08:20 PM
In the nztopo50 app, you can use the option in the bottom left “Go To”. Just enter the distance and bearing and it’ll project a point, which you can then go directly to or save as a waypoint.
Liked On: 08-06-2024, 06:12 PM
Hi Taka, I think the answer to your question depends a lot on how you hunt, where you hunt and how you do your holds / dial. I've been using NF and Leupold optics for 19 years and only use NF...
Liked On: 07-06-2024, 08:51 PM
251921 Sika vs 75gr eldm yesterday. Amazing the expansion even with a low muzzle velocity. At 20 odd yards no part of the bullet exited her head.
Liked On: 07-06-2024, 06:56 AM
Took out my .223 for it's first proper outing in the weekend. Howa mini .223. 69gn Targex. Arken zulus scope. Wouldn't have mattered what calibre I used. ...
Liked On: 07-06-2024, 06:54 AM
It's the BC, cost per round, and shootability, not the SD
Liked On: 07-06-2024, 06:53 AM
Mostly bush hunting you need minimum 3x or lower in the bottom end. You want good glass for low light and if practical, illumination is a nice to have. You've said you're mostly bush hunting which...
Liked On: 12-05-2024, 09:19 PM
249584
Liked On: 12-05-2024, 09:16 PM
The ideal scope would be something like a 2.5 to 10. Or something like the March 1.5 to 15 but with a 30 mm tube in first focal plane instead of 34mm tube. Also if Swarovski could have done their old...
Liked On: 12-05-2024, 09:16 PM
This evening. 230 yds with a 60 grn Hammer. Front on central neck shot. Bored a good hole right through his neck and spine. He was letting out the odd roar. 249988
Liked On: 11-05-2024, 12:05 PM
You're absolutely correct if one is working in the confines of a 2.26" OAL standard SAAMI mag and that should be noted. If there is the ability to load out longer than 2.26" OAL, e.g. using a...
Liked On: 11-05-2024, 12:05 PM
For those reading this thread, these are extremely hot loads, to the point of being dangerous. GRT (albeit not calibrated with old mates brass capacity COAL or exact barrel length ) gives a...
Liked On: 09-05-2024, 05:40 PM