Tikka7mm08
Member

1745 Likes

Page 18 of 117 First ... 456789101112131415161718192021222324252627282930313268 ... Last

• Jump to page:

1. 
   Tikka7mm08 liked post by Fisherman On thread : Kimber Montana Ascent 280AI Load Development

   First thing I do with a new scope is set up a grid at 100 and measure the actual adjustment from the maximum dial up I expect to use hunting, which for me is 700 yards. Just dialing the scope, not...

   Liked On: 15-02-2022, 01:48 PM

2. 
   Tikka7mm08 liked post by bunji On thread : Show us your boat

   While we had our little "Grab The Bloody Ark Noah" storm front go through last week, with at one stage 160mm falling on the farm in 4 hrs in amongst a week of rain ,while we were rained in the...

   Liked On: 14-02-2022, 08:24 PM

3. 
   Tikka7mm08 liked post by A330driver On thread : Show us your boat

   New vinyl job and decals …. Very happy with it 190073

   Liked On: 14-02-2022, 12:02 PM

4. 
   Tikka7mm08 liked post by mikee On thread : Kimber Montana Ascent 280AI Load Development

   if using Strelok Pro you can select between MOA, MRAD, inches@100yards or SMOA or cm@100m depending on what your scope actually is and you can tutu with the size of adjustment from there if your...

   Liked On: 13-02-2022, 12:28 PM

5. 
   Tikka7mm08 liked post by Moa Hunter On thread : Kimber Montana Ascent 280AI Load Development

   Good shooting. Re your other thread question kimber / Rem mags, I compared the Rem 700 follower and the Kimber. The Rem is longer by prob 6mm. The Rem is a double stack and the Kimber a single, so...

   Liked On: 13-02-2022, 10:45 AM

6. 
   Tikka7mm08 liked post by PerazziSC3 On thread : Kimber Montana Ascent 280AI Load Development

   The bc is more realistically .72 at those speeds.

   Liked On: 13-02-2022, 08:37 AM

7. 
   Tikka7mm08 liked post by RugerM77 On thread : Load ladder, annealing conundrum

   Sounds very fair to me.

   Liked On: 12-02-2022, 09:29 AM

8. 
   Tikka7mm08 liked post by T.FOYE On thread : AMP Annealing Service for Forum Members?

   You get that irregularity from the quality of the brass. The AMP unit will show you the brass you need to set aside as the thinner necks will have a different colouring when done. Try measuring any...

   Liked On: 12-02-2022, 12:15 AM

9. 
   Tikka7mm08 liked post by 7.62 On thread : 30-06

   As good as the 30-06 is, if it were me I would be looking at a 7mmRM or 300WM with a 24in barrel, muzzle brake, and high BC pills. The 30-06 packs a heavy punch but there will be more wind drift...

   Liked On: 10-02-2022, 04:55 PM

10. 
    Tikka7mm08 liked post by Bullers243 On thread : 30-06

    This is a very interesting thread,I have a 308 and a 30.06,both with 20 inch barrels and suppressed. I get very similar performance from both calibers,the 30.06 is giving me 85 ft/s faster speeds...

    Liked On: 10-02-2022, 04:54 PM

11. 
    Tikka7mm08 liked post by novembersierra On thread : 30-06

    Mine is blued steel and walnut and a 24" barrel. Not going to be my first choice for bush bashing but that's why I have a lever 30-30. Commonality of components is a great reason to have different...

    Liked On: 10-02-2022, 04:52 PM

12. 
    Tikka7mm08 liked post by Nick.m On thread : Kimber Montana Ascent 280AI Load Development

    I'm not sure of exact BC but I've been using. 796 recently. Shot out to 350 and found it was reasonably close. 189722 For those interested, I've also just done a load for a kimber 280ai using...

    Liked On: 09-02-2022, 09:28 PM

13. 
    Tikka7mm08 liked post by chainsaw On thread : Kimber Montana Ascent 280AI Load Development

    LOL ... Anyone able to confirm the BC of the 180 eldm? Seen two Hornady sources quote .777 and .796. Glad to see its not just me. Hornady like to make it as confusing as possible with BCs for...

    Liked On: 08-02-2022, 01:45 PM

14. 
    Tikka7mm08 liked post by cambo On thread : Crispi or Lowa boots!?

    I've had Lowas for a long time. Great boots. Had Asolo prior though. Everyone is different. Need to try them and choose what fits the best. Brand doesn't matter.

    Liked On: 02-02-2022, 02:19 PM

15. 
    Tikka7mm08 liked post by Cordite On thread : Mike Loder

    You are not going to be forgotten, Mike. Nor how Judith Collins barked at you like a mad dog. But at least you got to see her fall.

    Liked On: 31-01-2022, 02:42 PM

Page 18 of 117 First ... 456789101112131415161718192021222324252627282930313268 ... Last

• Jump to page: