Nice eaters there.
Liked On: 01-12-2024, 04:09 PM
Who’s the old guy? Sent from my iPhone using Tapatalk
Liked On: 30-11-2024, 07:47 PM
This is a scabbard for the 45/70 lever action I have made to be strapped to my pack with the muzzle end in the drink bottle holder which still allows fast access to the rifle...also moulded to the...
Liked On: 14-11-2024, 10:33 AM
I'm not sure if this is the right place but after a multitude of requests (ok, ..two nearly!) I have some photos of some of my leather creations. As I have said I am not a trained professional and...
Liked On: 14-11-2024, 10:31 AM
I found a knife hidden away in a box of tools I inherited recently from a clean out my grandfather had. Upon further inspection (it was quite rusty, forgot to get proper before photos, oops) it...
Liked On: 14-11-2024, 10:29 AM
That's because you could shoot a wild deer from your upstairs window !
Liked On: 07-11-2024, 02:59 PM
Ive got one of these in my pack as a spare: https://www.havalon.com/titan-wred-insert-1-fixed- The advantage being that it has an ordinary blade for heavier work and it has a decent handle. Bigger...
Liked On: 07-11-2024, 12:22 PM
Work out your maximum range and acceptable error. True your muzzle velocity on the rangefinder so the drop matches at maximum range. Compare your results at varying distances to check the error is...
Liked On: 02-11-2024, 10:43 AM
Swaros don’t dial true moa (1.05in) or Smoa (1.00 in) but somewhere between 0.95 - 0.97 in. I have read several sources stating 0.95in per moa at 100yds. On Swaros I owned and done my own calibration...
Liked On: 02-11-2024, 10:43 AM
Yeah, something like that. Might be enough to make them match? Sent from my SM-G525F using Tapatalk
Liked On: 01-11-2024, 10:09 PM
Nice. I have a 280 AI that I built on a Sako L61R action with a Douglas barrel 24". It shoots very well. I have a great load with Nosler Accubond 160 gr over N560. I get 3000 fps which is the...
Liked On: 13-09-2024, 12:38 PM
Just an observation (in case the original photo led folk to think otherwise) is that alignment should be confirmed at two positions, and not with a single placement. The diagram at the side shows how...
Liked On: 09-09-2024, 02:55 PM
God damn that front stud is a PITA. Mine flogged out in the stock so I had to do the same as you have done. The honeycomb in the forend was not centered at the stud so I ended up making a larger...
Liked On: 07-09-2024, 10:33 PM
Yeah m96 Mauser data is more or less the start load for a modern rifle. I might sneak up to about another .5gr on both loads and see where it's at. Alternatively I might load singles...
Liked On: 07-09-2024, 07:29 PM
You dont see Sheep wearing fleece for a good reason :thumbsup:
Liked On: 16-06-2024, 02:28 PM