Tikka7mm08
Member

1711 Likes

Page 23 of 115 First ... 91011121314151617181920212223242526272829303132333435363773 ... Last

• Jump to page:

1. 
   RugerM77 liked post by Tikka7mm08 On thread : Load ladder, annealing conundrum

   I do the annealing the deal is if I don't have the pilot the person buys and sends to me to add to the collection for the next person.

   Liked On: 12-02-2022, 08:11 AM

2. 
   dannyb liked post by Tikka7mm08 On thread : Load ladder, annealing conundrum

   I do the annealing the deal is if I don't have the pilot the person buys and sends to me to add to the collection for the next person.

   Liked On: 12-02-2022, 12:23 AM

3. 
   dannyb liked post by Tikka7mm08 On thread : Load ladder, annealing conundrum

   I'll AMP anneal for free for you (find that thread if keen). Hot brass based on a colour change then put into water seems a bit variable? Agree with above about other priorities...annealing is icing...

   Liked On: 11-02-2022, 12:41 PM

4. 
   zimmer liked post by Tikka7mm08 On thread : Load ladder, annealing conundrum

   I'll AMP anneal for free for you (find that thread if keen). Hot brass based on a colour change then put into water seems a bit variable? Agree with above about other priorities...annealing is icing...

   Liked On: 11-02-2022, 08:55 AM

5. 
   RugerM77 liked post by Tikka7mm08 On thread : Load ladder, annealing conundrum

   I'll AMP anneal for free for you (find that thread if keen). Hot brass based on a colour change then put into water seems a bit variable? Agree with above about other priorities...annealing is icing...

   Liked On: 11-02-2022, 07:36 AM

6. 
   dannyb liked post by Tikka7mm08 On thread : 30-06

   Anything the 308 does the 3006 does better and the 300wsm does better again and so on. Any caliber is a compromise in some measure. Apart from the 280AI. If your mate wants to shoot past 600y...

   Liked On: 10-02-2022, 05:39 PM

7. 
   dannyb liked post by Tikka7mm08 On thread : Kimber Montana Ascent 280AI Load Development

   Yeah bit confusing, they have Mac 1 and Mach 2 but I think Strelok does all the calcs if you plug in the nominal BC? I'll test out to 600y and see where I get to.

   Liked On: 08-02-2022, 01:46 PM

8. 
   gqhoon liked post by Tikka7mm08 On thread : Kimber Montana Ascent 280AI Load Development

   COAL adjusted to 3.340" for mag fit. Unlike 3.380", which is not mag fit. FFS. 58.4gn (0.5 MOA first shot cold clean barrel to left) and 58.8gn shot well. Going to try 59.0gn to see if group comes...

   Liked On: 06-02-2022, 08:45 PM

9. 
   Micky Duck liked post by Tikka7mm08 On thread : Kimber Montana Ascent 280AI Load Development

   COAL adjusted to 3.340" for mag fit. Unlike 3.380", which is not mag fit. FFS. 58.4gn (0.5 MOA first shot cold clean barrel to left) and 58.8gn shot well. Going to try 59.0gn to see if group comes...

   Liked On: 06-02-2022, 06:16 PM

10. 
    dannyb liked post by Tikka7mm08 On thread : Kimber Montana Ascent 280AI Load Development

    COAL adjusted to 3.340" for mag fit. Unlike 3.380", which is not mag fit. FFS. 58.4gn (0.5 MOA first shot cold clean barrel to left) and 58.8gn shot well. Going to try 59.0gn to see if group comes...

    Liked On: 06-02-2022, 04:52 PM

11. 
    dannyb liked post by Tikka7mm08 On thread : Resizing inconsistency - Am I missing something

    ^ +1

    Liked On: 06-02-2022, 07:52 AM

12. 
    Kelton liked post by Tikka7mm08 On thread : Kimber Montana Ascent 280AI Load Development

    Drop table with 180gn ELDM @ 2850fps 100y zero. Note BC used is 0.796. This BC is from the hornady website. I'll be able to try real world test on 600y gong at home. Absolute hammer. ...

    Liked On: 05-02-2022, 01:50 PM

13. 
    caberslash liked post by Tikka7mm08 On thread : Kimber Montana Ascent 280AI Load Development

    Drop table with 180gn ELDM @ 2850fps 100y zero. Note BC used is 0.796. This BC is from the hornady website. I'll be able to try real world test on 600y gong at home. Absolute hammer. ...

    Liked On: 03-02-2022, 01:22 AM

14. 
    chainsaw liked post by Tikka7mm08 On thread : Kimber Montana Ascent 280AI Load Development

    Drop table with 180gn ELDM @ 2850fps 100y zero. Note BC used is 0.796. This BC is from the hornady website. I'll be able to try real world test on 600y gong at home. Absolute hammer. ...

    Liked On: 02-02-2022, 09:32 PM

15. 
    Moa Hunter liked post by Tikka7mm08 On thread : Kimber Montana Ascent 280AI Load Development

    Yep it thumps the 162gn on energy but the 180gn isn't flatter shooting until 1000y. Still, very little given away by the 180.

    Liked On: 31-01-2022, 07:24 PM

Page 23 of 115 First ... 91011121314151617181920212223242526272829303132333435363773 ... Last

• Jump to page: