Tikka7mm08
Member

1711 Likes

Page 16 of 115 First ... 2345678910111213141516171819202122232425262728293066 ... Last

• Jump to page:

1. 
   Tikka7mm08 liked post by Moa Hunter On thread : Kimber Montana Ascent 280AI Load Development

   Good shooting. Re your other thread question kimber / Rem mags, I compared the Rem 700 follower and the Kimber. The Rem is longer by prob 6mm. The Rem is a double stack and the Kimber a single, so...

   Liked On: 13-02-2022, 10:45 AM

2. 
   Tikka7mm08 liked post by PerazziSC3 On thread : Kimber Montana Ascent 280AI Load Development

   The bc is more realistically .72 at those speeds.

   Liked On: 13-02-2022, 08:37 AM

3. 
   Tikka7mm08 liked post by RugerM77 On thread : Load ladder, annealing conundrum

   Sounds very fair to me.

   Liked On: 12-02-2022, 09:29 AM

4. 
   Tikka7mm08 liked post by T.FOYE On thread : AMP Annealing Service for Forum Members?

   You get that irregularity from the quality of the brass. The AMP unit will show you the brass you need to set aside as the thinner necks will have a different colouring when done. Try measuring any...

   Liked On: 12-02-2022, 12:15 AM

5. 
   Tikka7mm08 liked post by 7.62 On thread : 30-06

   As good as the 30-06 is, if it were me I would be looking at a 7mmRM or 300WM with a 24in barrel, muzzle brake, and high BC pills. The 30-06 packs a heavy punch but there will be more wind drift...

   Liked On: 10-02-2022, 04:55 PM

6. 
   Tikka7mm08 liked post by Bullers243 On thread : 30-06

   This is a very interesting thread,I have a 308 and a 30.06,both with 20 inch barrels and suppressed. I get very similar performance from both calibers,the 30.06 is giving me 85 ft/s faster speeds...

   Liked On: 10-02-2022, 04:54 PM

7. 
   Tikka7mm08 liked post by novembersierra On thread : 30-06

   Mine is blued steel and walnut and a 24" barrel. Not going to be my first choice for bush bashing but that's why I have a lever 30-30. Commonality of components is a great reason to have different...

   Liked On: 10-02-2022, 04:52 PM

8. 
   Tikka7mm08 liked post by Nick.m On thread : Kimber Montana Ascent 280AI Load Development

   I'm not sure of exact BC but I've been using. 796 recently. Shot out to 350 and found it was reasonably close. 189722 For those interested, I've also just done a load for a kimber 280ai using...

   Liked On: 09-02-2022, 09:28 PM

9. 
   Tikka7mm08 liked post by chainsaw On thread : Kimber Montana Ascent 280AI Load Development

   LOL ... Anyone able to confirm the BC of the 180 eldm? Seen two Hornady sources quote .777 and .796. Glad to see its not just me. Hornady like to make it as confusing as possible with BCs for...

   Liked On: 08-02-2022, 01:45 PM

10. 
    Tikka7mm08 liked post by cambo On thread : Crispi or Lowa boots!?

    I've had Lowas for a long time. Great boots. Had Asolo prior though. Everyone is different. Need to try them and choose what fits the best. Brand doesn't matter.

    Liked On: 02-02-2022, 02:19 PM

11. 
    Tikka7mm08 liked post by Cordite On thread : Mike Loder

    You are not going to be forgotten, Mike. Nor how Judith Collins barked at you like a mad dog. But at least you got to see her fall.

    Liked On: 31-01-2022, 02:42 PM

12. 
    Tikka7mm08 liked post by dannyb On thread : tight closing the bolt

    Cant offer much advice but was the brass originally fired in the chamber of the rifle your loading for ? I did have this issue once a while back in my 270wsm and it was fixed by winding my full...

    Liked On: 31-01-2022, 12:59 PM

13. 
    Tikka7mm08 liked post by JohnDuxbury On thread : tight closing the bolt

    You will need full length resize those cases next time round, if you have just been neck sizing them. If you can close the bolt on them they will be fine too shoot, in fact a tight fit will make...

    Liked On: 31-01-2022, 12:59 PM

14. 
    Tikka7mm08 liked post by mikee On thread : Choosing calibre based on ammunition availablitiy

    If you intend to shoot a little......buy a 308 If you intend to shoot a lot .........buy a 308 If you intend to reload ..................buy a 308 Its not trendy or new but it plain works. Took...

    Liked On: 31-01-2022, 09:45 AM

15. 
    Tikka7mm08 liked post by SPEARONZ On thread : Kimber Montana Ascent 280AI Load Development

    180eldms at over 2800fps is going to be devastating

    Liked On: 30-01-2022, 10:53 AM

Page 16 of 115 First ... 2345678910111213141516171819202122232425262728293066 ... Last

• Jump to page: