Tikka7mm08
Member

1660 Likes

Page 11 of 111 First 1234567891011121314151617181920212223242561 ... Last

• Jump to page:

1. 
   Mark M liked post by Tikka7mm08 On thread : 6.5 PRC Load Development Begins

   Yes they wouldn't chamber. Yes will do thanks Danny.

   Liked On: 26-07-2022, 06:14 PM

2. 
   Moa Hunter liked post by Tikka7mm08 On thread : Seating depth headache

   Annealing brass does help. Happy to do for you.

   Liked On: 26-07-2022, 08:44 AM

3. 
   veitnamcam liked post by Tikka7mm08 On thread : 6.5 PRC Load Development Begins

   Pretty much as I thought with pressure showing at 60gn with slightly firmer bolt lift no ejector mark but both at 60.5gn so no need to shoot 61gn. Loaded 3 at 59gn in anticipation and nice SD so...

   Liked On: 24-07-2022, 10:17 PM

4. 
   veitnamcam liked post by Tikka7mm08 On thread : 6.5 PRC Load Development Begins

   Poor signal uploading pics. https://uploads.tapatalk-cdn.com/20220722/d2560dcda895125a5c6891c401f6e3c2.jpg Sent from my SM-G998B using Tapatalk

   Liked On: 24-07-2022, 10:15 PM

5. 
   veitnamcam liked post by Tikka7mm08 On thread : 6.5 PRC Load Development Begins

   Very please with first rounds and reconnecting with that Tikka goodness. Lovely rifle to shoot. First shot 53gn off to right after bore sighting. Adjusted scope to left and then shot 54, 55, 56,...

   Liked On: 24-07-2022, 10:11 PM

6. 
   Kelton liked post by Tikka7mm08 On thread : 6.5 PRC Load Development Begins

   Yep. Got plenty of RE26 still and have a load sorted.

   Liked On: 24-07-2022, 06:26 PM

7. 
   dannyb liked post by Tikka7mm08 On thread : 6.5 PRC Load Development Begins

   Yep. Got plenty of RE26 still and have a load sorted.

   Liked On: 24-07-2022, 05:52 PM

8. 
   Link liked post by Tikka7mm08 On thread : 6.5 PRC Load Development Begins

   Annealing makes a difference - it will help a pretty good load but it won't fix a bad one if you know what I mean. It takes about 5-10min I guess to put 100ish through the annealer so is the fastest...

   Liked On: 24-07-2022, 10:51 AM

9. 
   Bill999 liked post by Tikka7mm08 On thread : 6.5 PRC Load Development Begins

   Very please with first rounds and reconnecting with that Tikka goodness. Lovely rifle to shoot. First shot 53gn off to right after bore sighting. Adjusted scope to left and then shot 54, 55, 56,...

   Liked On: 23-07-2022, 11:14 PM

10. 
    Bill999 liked post by Tikka7mm08 On thread : 6.5 PRC Load Development Begins

    Polished, sized, primer pockets cleaned, mouth chamfer and primed. The brass was pretty easy to size until chambering well in my gun - noting of course this brass was shot in another gun. Now for...

    Liked On: 23-07-2022, 11:13 PM

11. 
    Kelton liked post by Tikka7mm08 On thread : 6.5 PRC Load Development Begins

    SD = 4.51 fps across the 4x59gn shots.

    Liked On: 23-07-2022, 10:30 PM

12. 
    Kelton liked post by Tikka7mm08 On thread : 6.5 PRC Load Development Begins

    Pretty much as I thought with pressure showing at 60gn with slightly firmer bolt lift no ejector mark but both at 60.5gn so no need to shoot 61gn. Loaded 3 at 59gn in anticipation and nice SD so...

    Liked On: 23-07-2022, 10:30 PM

13. 
    Kelton liked post by Tikka7mm08 On thread : 6.5 PRC Load Development Begins

    Poor signal uploading pics. https://uploads.tapatalk-cdn.com/20220722/d2560dcda895125a5c6891c401f6e3c2.jpg Sent from my SM-G998B using Tapatalk

    Liked On: 23-07-2022, 10:29 PM

14. 
    Kelton liked post by Tikka7mm08 On thread : 6.5 PRC Load Development Begins

    Very happy. Primers all good if not better than at 57.0gn and grouping all together really well despite freezing office worker hands. Good south-westerly and about 6-7deg. ...

    Liked On: 23-07-2022, 10:28 PM

15. 
    dannyb liked post by Tikka7mm08 On thread : 6.5 PRC Load Development Begins

    I reckon.

    Liked On: 23-07-2022, 08:55 PM

Page 11 of 111 First 1234567891011121314151617181920212223242561 ... Last

• Jump to page: