make sure you make an expansion chamber if fitting fuel tank or you will always have fuel coming out your breather
Liked On: 27-07-2016, 09:17 PM
52875 i made this for my boat if you are keen for the odd livey to easy put 3 or 4 rod holders and just bolted to transom strong as fuck make sure you have a drain at back and somewhere to put tackle...
Liked On: 27-07-2016, 09:16 PM
Well set up wagon that one.But without fast axels and a turbo its going to be a long slow drive anywhere.I drove my first one from Germany to Norway and my second one half the length of Norway.My...
Liked On: 27-07-2016, 08:45 PM
Well it does now [emoji6] Sent from my iPhone using Tapatalk
Liked On: 27-07-2016, 08:35 PM
I have always maintained that it is the service from a company when something goes wrong that sets them apart from others. Every manufacturer and wholesaler I have ever dealt with has had faulty...
Liked On: 27-07-2016, 07:55 PM
For several years I've been using rather 'average' quality Bushnell BAK-4 porro prism binoculars for hunting & bird watching, namely, Legend 10x50 and Sportec 7x35. I've long desired a decent quality...
Liked On: 27-07-2016, 07:54 PM
If you're only shooting goats, it's a bit like asking what size hammer do you need to kill ants. Short of FMJs or ultra-explosive varmint options, anything in the middle will do, long as it's...
Liked On: 27-07-2016, 07:38 PM
Firstly Make a prototype I'll test it out for you ;)
Liked On: 26-07-2016, 09:07 PM
For ten grand I would buy a boat and take my mates fishing in that. Actually I did do that.
Liked On: 24-07-2016, 09:33 PM
Man cave...must tidy. Train table taken over by powder supplies... http://uploads.tapatalk-cdn.com/20160724/39dec355cb5752645ae17ed1059bd0f7.jpg ...
Liked On: 24-07-2016, 09:24 PM
The daughter turns 4 next month, so some may say to young, however she is a switched on kid, and I reckon will go OK. Just nice and easy for a start..... and if she doesn't like it, she doesn't like...
Liked On: 24-07-2016, 09:22 PM
As a b day gift for the daughter ( in a few weeks, she's been on at me to get her one for about a year....). Had to go and give it a go, to make sure all was OK etc.... :) impressed with the...
Liked On: 24-07-2016, 09:21 PM
Ok, now the next bit is to machine two of the ali blocks faces true, again set up in chuck and skim one face on each block. Now the two faces will be the inside of the mould but before drilling the...
Liked On: 24-07-2016, 09:09 PM
Work phone with a recycled number man the drug deals, slappers that the previous owner got rung about :thumbsup:
Liked On: 24-07-2016, 09:02 PM
Plenty of options, pick a destination and date and do it. I had mine in a forestry camp in/near port underwood...fishing,pigs and goats. My best mate had his in a woolshed near Kahurangi, farking...
Liked On: 24-07-2016, 09:02 PM