Don't fix something that aint broken! Nothing at all wrong with the zeon-they really are a great bit of rubber but I would sooner stick with the AT3 as they tend to be a bit more robust and have...
Liked On: 20-01-2020, 06:35 PM
Well I must be just a lad then 'cause I'll keep using the skewers. Might be ok for a small coil but these weigh a over kilo each. if you manage to get half it in your tongs you still have a 1/2 of it...
Liked On: 18-01-2020, 06:48 PM
The whisky doesnt do so well at putting the fire out ?:D
Liked On: 18-01-2020, 03:06 PM
I managed to get to the range today to test some new reloads for my Bergara .357 magnum. I've had a bit of reloading experience, but up until recently I've just followed common recipes. However,...
Liked On: 17-01-2020, 10:05 PM
It is a annoyance of mine that most dies prescribe to set up the FL die as you have described. The problem with those instructions is that they often cause an excessive headspace issue, they give...
Liked On: 16-01-2020, 09:07 PM
The Vixen should be a fairly straight forward rebarrel. It has a internal .223 mag with a max COAL of 58.5mm, so the same as my CZ 527 mags. It has a custom carbon fiber Stug stock fitted so as...
Liked On: 15-01-2020, 09:26 PM
Its been a busy first week back at work but found some time to machine and pre-chamber the Sako Vixen barrel to fit up this weekend. Will then focus on the Zastava builds. Still not sure if Ill put...
Liked On: 15-01-2020, 08:55 PM
Yeahp
Liked On: 14-01-2020, 09:31 PM
I don't think it offers much in the way of structure, the sceptic in me want to say they used that over a foam to make the rifle weigh more than the Montana to justify the big jump in cost Sent...
Liked On: 14-01-2020, 09:16 PM
What strange junk in the stock. Still it will need something to give it internal support and boost strength. The Bell and Carlson stocks are filled with Polyurethane foam so a tin of PU expanding...
Liked On: 14-01-2020, 09:16 PM
I keep shilling the idea that someone should make these guns work with AR15 mags in the hope that some bright spark with the gear actually does it
Liked On: 11-01-2020, 11:11 PM
My guess would be that is why these barrels were removed. I can't imagine they would have shot well and the amount of deep scratching in the chamber walls right around where you'd normally see case...
Liked On: 10-01-2020, 08:54 PM
Sharing is caring right? A couple more used 6mm barrels from guncity's website arrived today to fit up on some 6x45 converted mates rifles. 127858 127859 All have been labeled 6mm TCU,...
Liked On: 10-01-2020, 08:23 PM
Yep, try another scope before anything else, will eliminate the rifle or the scope, much easier less mucking around
Liked On: 09-01-2020, 06:33 PM
https://uploads.tapatalk-cdn.com/20190312/a49e3af43a8df16d0c60bcf6639976a9.jpghttps://uploads.tapatalk-cdn.com/20190312/87d5b98658b309d7b40c32e65b371fb9.jpg my tiny trailer tregg off road hitch eye...
Liked On: 06-01-2020, 03:31 PM