What a good bastard
Liked On: 04-01-2020, 10:31 PM
If you send it to me I will fix it for free. Just pay post.
Liked On: 04-01-2020, 10:31 PM
Splinter fore end done. Fitted around the hanger bar and the action folds inside the end of it when it hinges. It's perfect when carrying one handed because the ballence point is just in front or...
Liked On: 02-01-2020, 10:04 PM
Wet day so finished the take down thumb screw. Knurled the end and tapped in the m3 cap screw that makes it captive under the grip cap. Fitted a hanger bar also and will start on a splinter fore...
Liked On: 02-01-2020, 10:03 PM
That looks like a great solution. Making the bolt captive might save a hunt around in the long wet grass someday.
Liked On: 02-01-2020, 10:01 PM
I just popped the T.C. emblem off the pistol grip cap and bored it out 18mm for the 16mm take down screw diameter which comes through in a slight angle and it comes out through the center of where...
Liked On: 02-01-2020, 10:01 PM
joelhenton I solved the tool less take down problem. Don't take down at the hinge pin Take down at the butt stock bolt. Barrel plus action stay together and are only 40mm longer than barrel...
Liked On: 02-01-2020, 10:01 PM
I've posted this before on the forum but it's changed slightly since then, still a work in progress. My Thompson Contender G1, a classy little takedown single shot in 30-30 I think. Barrel fluted,...
Liked On: 02-01-2020, 09:48 PM
Most of what Fanzoj makes is in the $50k+ range. They don't list prices on their website - "if you've gotta ask..." as the saying goes. So yeah. Baikal > Fanzoj. :thumbsup:
Liked On: 02-01-2020, 08:41 PM
From memory, 2.3kg with scope and a round loaded, two in the holder on the side and suppressor. you carry it like a necklace and the barrel end is detachable. Very accurate too, but priced at around...
Liked On: 02-01-2020, 08:18 PM
All handed out sorry. I've had quite a few additional requests to purchase tins - enough to make me realise that the purpose of my original post can't have been very clear: the idea was to...
Liked On: 31-12-2019, 10:08 PM
126108 Marlin Model 60SS (10 shot for any STASI informants viewing this thread:thumbsup:) with Nikko Stirling red dot.
Liked On: 31-12-2019, 10:06 PM
My other two bunny shooters. Ruger 10/22 which I had a bit of work done through "gundoc" who lightened the trigger and sorted out the jamming issue though as long as it's cleaned with a bit of...
Liked On: 31-12-2019, 10:03 PM
Most people have a scope attached to their rifle, not have a rifle attached to their scope.:o
Liked On: 31-12-2019, 09:20 PM
The inletting is different on the k95 , it’s Merkel k3 stutzen black edition . Happy new year
Liked On: 31-12-2019, 09:15 PM