TonyT
Member

13 Likes

1. 
   caberslash liked post by TonyT On thread : .222 turning back the clock

   I shot both SAKO and Hirtenberger (correct spelling) extensively during the 60's and 70's until I started reloading, still have a couple of packs of the SAKO ammo and a few packets of fired brass...

   Liked On: 12-11-2021, 01:52 AM

2. 
   veitnamcam liked post by TonyT On thread : .222 turning back the clock

   I shot both SAKO and Hirtenberger (correct spelling) extensively during the 60's and 70's until I started reloading, still have a couple of packs of the SAKO ammo and a few packets of fired brass...

   Liked On: 11-11-2021, 09:20 PM

3. 
   Nathan F liked post by TonyT On thread : .222 turning back the clock

   I shot both SAKO and Hirtenberger (correct spelling) extensively during the 60's and 70's until I started reloading, still have a couple of packs of the SAKO ammo and a few packets of fired brass...

   Liked On: 09-11-2021, 01:59 PM

4. 
   ZQLewis liked post by TonyT On thread : Berger 87gr. 243 load data required

   Seeing as there appears to be some difficulty interpreting the Berger data I posted in post #5 I have attached photos of the two relevant pages of the Berger manual. 177455 177456 I hope...

   Liked On: 05-09-2021, 12:42 AM

5. 
   tetawa liked post by TonyT On thread : Berger 87gr. 243 load data required

   Seeing as there appears to be some difficulty interpreting the Berger data I posted in post #5 I have attached photos of the two relevant pages of the Berger manual. 177455 177456 I hope...

   Liked On: 03-09-2021, 01:14 PM

6. 
   Cartman liked post by TonyT On thread : Help me. Howa 1500 problem

   The Howa trigger sear engagement screw is a standard iso metric 4mm x 0.7mm pitch screw 14mm long with a slot for a small jewellers screwdriver blade.

   Liked On: 10-11-2015, 07:25 PM

7. 
   jakewire liked post by TonyT On thread : Help me. Howa 1500 problem

   The Howa trigger sear engagement screw is a standard iso metric 4mm x 0.7mm pitch screw 14mm long with a slot for a small jewellers screwdriver blade.

   Liked On: 10-11-2015, 07:11 PM

8. 
   6mm ackley liked post by TonyT On thread : Help me. Howa 1500 problem

   The Howa trigger sear engagement screw is a standard iso metric 4mm x 0.7mm pitch screw 14mm long with a slot for a small jewellers screwdriver blade.

   Liked On: 10-11-2015, 06:41 PM

9. 
   gadgetman liked post by TonyT On thread : Help me. Howa 1500 problem

   The Howa trigger sear engagement screw is a standard iso metric 4mm x 0.7mm pitch screw 14mm long with a slot for a small jewellers screwdriver blade.

   Liked On: 10-11-2015, 05:46 PM

10. 
    Flincher liked post by TonyT On thread : Help me. Howa 1500 problem

    The Howa trigger sear engagement screw is a standard iso metric 4mm x 0.7mm pitch screw 14mm long with a slot for a small jewellers screwdriver blade.

    Liked On: 10-11-2015, 04:14 PM

11. 
    veitnamcam liked post by TonyT On thread : Defective Winchester LR primers

    41898 With help from Cam we will try again, thanks.

    Liked On: 30-10-2015, 12:27 PM

12. 
    PERRISCICABA liked post by TonyT On thread : Not sure where to go with these handloads

    I shot and loaded for a .270 Win for over 40 years and looking at all the data I acquired over that time AR2209 would not be my first choice of powder. H4831 gave consistently best accuracy and...

    Liked On: 31-01-2015, 11:44 PM

13. 
    veitnamcam liked post by TonyT On thread : Not sure where to go with these handloads

    I shot and loaded for a .270 Win for over 40 years and looking at all the data I acquired over that time AR2209 would not be my first choice of powder. H4831 gave consistently best accuracy and...

    Liked On: 31-01-2015, 04:47 PM