To me its all about practicality. Yes it would be nice to keep the rifle in original condition but if that means it doesn't fit your requirements then whats the point? So I agree with the 20" barrel...
Liked On: 16-11-2023, 10:43 AM
If it was my Grandads rifle, I sure as hell wouldnt be chopping it or ceracoating it. Out of respect to my Grandad, I may tidy it up, and maybe redo the stock as you have done. But if the metalwork...
Liked On: 16-11-2023, 10:43 AM
My 2 c don't cut it or ceracoat it, have it reblued properly and keep it true to it's origins. Buy some "cheap" modern rifle second hand for a reasonable price and chop that if you wish. Being a...
Liked On: 16-11-2023, 08:26 AM
Probably the most versatile 270 I've had (and I've had one or two) would have been 19" T3, it was nice to point and carry with dpt on it and could still poke 150 LRABs out at 2850 which puts the hurt...
Liked On: 16-11-2023, 08:26 AM
If you want to do it yourself use grinding paste on a felt bob with it in a drill press as Husky said. It is a bit of a long winded process but can be rewarding if you want to add a personal touch....
Liked On: 20-10-2023, 09:59 AM
You can do it yourself, with a simple wooden jig to hold the bolt. Put a standard old school pencil with an eraser tip on it in the drill press and line up your bolt underneath and gently bring it...
Liked On: 19-10-2023, 05:38 PM
I seem to remember back in the seventies, trolling through gun mags, that DIY bolt jeweling was a reasonably common thing. Not all that difficult if you’re a bit handy. Was actually thinking about...
Liked On: 19-10-2023, 05:38 PM
Allan Carr of Paraparaumu did my Winchester a few years back.excellent gunsmith.
Liked On: 18-10-2023, 09:35 PM
Maniatis do jewelling
Liked On: 18-10-2023, 09:35 PM
I am pretty sure Dean Maisey in Tauranga does this
Liked On: 18-10-2023, 09:35 PM
your ceracoat is a paint type job..the jeweling is machine marks....either way wont matter,if painting/spraying the areas not wanted done get masked off... its cosmetic at end of day...
Liked On: 18-10-2023, 09:35 PM
Jeweling first, ceracoat after. Sent from my iPhone using Tapatalk
Liked On: 18-10-2023, 09:35 PM
Agree. Even if this order just allows the gunsmith to fixture the bolt without worrying about damaging a ceracoted surface.
Liked On: 18-10-2023, 09:35 PM
if you look at my .308 build, they look mint fluted if you don't mind that look
Liked On: 18-10-2023, 09:21 PM
Sounds like you are forming a nice plan, cerakote was midnight blue i believe. Pillars are quite important as the wood is quite "soft" on these and if you are going to the effort of bedding (which...
Liked On: 17-10-2023, 08:28 AM