Tuckerbox
Member

205 Likes

Page 14 of 14 First 1234567891011121314

• Jump to page:

1. 
   TianBotha liked post by Tuckerbox On thread : Max fluting depth

   The mill I have access to has a chuck and tail stock, much like a lathe. marky123 thats a nice thought but i don't own an iPhone... Yup its a lot of effort but it's just for fun. Might as well...

   Liked On: 30-05-2016, 11:04 PM

2. 
   robhughes-games liked post by Tuckerbox On thread : Max fluting depth

   Barrel is standard hammer forged brno. As stated above the barrel will be subjected to proof loads and will then be retired to subs only. The bore is severely pitted and very little rifling remains,...

   Liked On: 28-05-2016, 09:44 AM

3. 
   veitnamcam liked post by Tuckerbox On thread : Max fluting depth

   Barrel is standard hammer forged brno. As stated above the barrel will be subjected to proof loads and will then be retired to subs only. The bore is severely pitted and very little rifling remains,...

   Liked On: 27-05-2016, 11:16 PM

4. 
   quentin liked post by Tuckerbox On thread : Bipod spikes

   I'll just pop it up here. I can change all dimensions to imperial if you prefer. http://i898.photobucket.com/albums/ac185/HarpoonKing/Bipod%20spikes_zpshf4i6skh.png...

   Liked On: 25-05-2016, 07:29 PM

5. 
   199p liked post by Tuckerbox On thread : Bipod spikes

   Thought I'd give making some spikes for my Harris a crack. Turned out reasonably well. All done on an old Colchester. First time on a lathe. Used 4 different drill bits to get just the right snug...

   Liked On: 25-05-2016, 06:09 PM

6. 
   mikee liked post by Tuckerbox On thread : Bipod spikes

   Thought I'd give making some spikes for my Harris a crack. Turned out reasonably well. All done on an old Colchester. First time on a lathe. Used 4 different drill bits to get just the right snug...

   Liked On: 24-05-2016, 09:13 PM

7. 
   Gibo liked post by Tuckerbox On thread : Bipod spikes

   Thought I'd give making some spikes for my Harris a crack. Turned out reasonably well. All done on an old Colchester. First time on a lathe. Used 4 different drill bits to get just the right snug...

   Liked On: 24-05-2016, 08:53 PM

8. 
   Munsey liked post by Tuckerbox On thread : Lay out blinds what's good ?

   I run an avery finisher and really rate it. Dome of the offerings from GHG are good too. I'd buy another finisher for a spare if I could.

   Liked On: 13-04-2016, 06:14 AM

9. 
   sako75 liked post by Tuckerbox On thread : Vol Fire crew, who is one?

   Hi guys. I'm a volley in Lincoln Canterbury. Reasonably busy station with 300 odd calls annually. Doing QFF in august and am currently doing drivers. Can't wait for first drive under lights. This is...

   Liked On: 10-04-2016, 10:41 PM

10. 
    smidey liked post by Tuckerbox On thread : Vol Fire crew, who is one?

    Hi guys. I'm a volley in Lincoln Canterbury. Reasonably busy station with 300 odd calls annually. Doing QFF in august and am currently doing drivers. Can't wait for first drive under lights. This is...

    Liked On: 10-04-2016, 08:51 PM

Page 14 of 14 First 1234567891011121314

• Jump to page: