Uplandstalker
Member

814 Likes

Page 11 of 55 First 12345678910111213141516171819202122232425 ... Last

• Jump to page:

1. 
   Moa Hunter liked post by Uplandstalker On thread : Another custom scope turret label

   Been using one on my 260 for a couple of months with great success. Plenty of hares falling at 500+ yds. Of course you need really good reloads etc.

   Liked On: 16-07-2020, 02:32 PM

2. 
   Moa Hunter liked post by Uplandstalker On thread : Another custom scope turret label

   Just made, fitted and shipped off another scope label for Kscott 43425

   Liked On: 16-07-2020, 02:32 PM

3. 
   Moa Hunter liked post by Uplandstalker On thread : Seating depth measurement problems

   Last night I built my own Modified case. I drilled out a primer pocket to fit a cleaning rod, sized the neck of the case and than took to it with my Dramel and cut three cuts down to the shoulder,...

   Liked On: 02-07-2020, 01:58 PM

4. 
   Been Upto liked post by Uplandstalker On thread : Copeland Valley - First Thar and/or Chamios Trip

   While the coast side of the hill may be different, these ones on the east side of the pass were at 1400m. But the bulls were still higher, closer to 2000m. The snow is currently high, but there is...

   Liked On: 16-06-2020, 12:55 AM

5. 
   dannyb liked post by Uplandstalker On thread : Copeland Valley - First Thar and/or Chamios Trip

   While the coast side of the hill may be different, these ones on the east side of the pass were at 1400m. But the bulls were still higher, closer to 2000m. The snow is currently high, but there is...

   Liked On: 15-06-2020, 07:06 PM

6. 
   ANTSMAN liked post by Uplandstalker On thread : The model 7 in your life

   I've given my Model 7 a rebirth From a 260imp to 6XC in a 1:7.5 26 inch heavy barrel. PT&G detachable bottom metal with MDT steel mag. Gunworks 3 port brake. I've put the original factory...

   Liked On: 20-04-2020, 01:07 PM

7. 
   dannyb liked post by Uplandstalker On thread : Bergara B14 Extreme Hunter 308

   Im keen on one of these also. The other option, slightly cheaper, is the Howa Alpine Rifle. But I sure the Bergara has it over the Howa

   Liked On: 17-04-2020, 07:34 PM

8. 
   McNotty liked post by Uplandstalker On thread : Bergara B14 Extreme Hunter 308

   Im keen on one of these also. The other option, slightly cheaper, is the Howa Alpine Rifle. But I sure the Bergara has it over the Howa

   Liked On: 17-04-2020, 05:47 PM

9. 
   Bigash liked post by Uplandstalker On thread : Chch Handloaders AMP Annealer. Who knows how to use it?

   There are a number of "how to" video's on the AMP website. There is a computer next to the machine at the club and the AMP website is saved at a bookmark

   Liked On: 23-03-2020, 01:34 PM

10. 
    blair993 liked post by Uplandstalker On thread : Sparrowhawk???

    Top 6 teams, in order: Greenlaw, Jake 284 Wilder, Scott 245 529 McIntyre, Scott 266 Robertson, J 257 523 Jones, Gareth 261 Jone, Garry 258 519 Hardy, Dan 279 Hughes, Ian 223 502 Easton,...

    Liked On: 17-03-2020, 03:12 PM

11. 
    Matt2308 liked post by Uplandstalker On thread : Sparrowhawk???

    Top 6 teams, in order: Greenlaw, Jake 284 Wilder, Scott 245 529 McIntyre, Scott 266 Robertson, J 257 523 Jones, Gareth 261 Jone, Garry 258 519 Hardy, Dan 279 Hughes, Ian 223 502 Easton,...

    Liked On: 17-03-2020, 01:26 PM

12. 
    Ex yuppie liked post by Uplandstalker On thread : Marlin XT-22

    I've had a XT-22 for close to 5 years and the obly trouble I had at the start for a tight chamber when extracting fired cases. A good scrub/clean and all good. I brought from H&F in Tower Juntion,...

    Liked On: 22-02-2020, 07:54 PM

13. 
    McNotty liked post by Uplandstalker On thread : Short Barrel Syndrome.

    Sound good reading in that lot. I'm about to cut a 270WSM to 17 or 18 inches, a Super Bushpig. Should be a hoot!

    Liked On: 17-02-2020, 09:18 PM

14. 
    GWH liked post by Uplandstalker On thread : The model 7 in your life

    I've given my Model 7 a rebirth From a 260imp to 6XC in a 1:7.5 26 inch heavy barrel. PT&G detachable bottom metal with MDT steel mag. Gunworks 3 port brake. I've put the original factory...

    Liked On: 16-02-2020, 10:15 PM

15. 
    7mmsaum liked post by Uplandstalker On thread : The model 7 in your life

    I've given my Model 7 a rebirth From a 260imp to 6XC in a 1:7.5 26 inch heavy barrel. PT&G detachable bottom metal with MDT steel mag. Gunworks 3 port brake. I've put the original factory...

    Liked On: 16-02-2020, 09:47 PM

Page 11 of 55 First 12345678910111213141516171819202122232425 ... Last

• Jump to page: