Uplandstalker
Member

772 Likes

Page 14 of 52 First 12345678910111213141516171819202122232425262728 ... Last

• Jump to page:

1. 
   piwakawaka liked post by Uplandstalker On thread : Missfired factory ammo

   Will need to ensure the headspace in the rifle is correct before you get to carried away blaming the factory ammo.

   Liked On: 05-08-2018, 11:21 PM

2. 
   Tertle liked post by Uplandstalker On thread : Bulge buster 40SW

   Tertle If you have some brass you need sorted, either I can do it for you or you can borrow my buster

   Liked On: 13-06-2018, 10:25 PM

3. 
   Scouterkotare liked post by Uplandstalker On thread : What do you know about Tisas Zigana for IPSC?

   One of the guys at the club had a Tisas 1911 45ACP on Sunday. Brand new and has already had it re-reamed to be able to fit factory ammo. Racking the slide was like dragging a 2-tonne steel sleed...

   Liked On: 15-05-2018, 07:41 PM

4. 
   Scouterkotare liked post by Uplandstalker On thread : Ruger MK IV Tactical

   I'm keen on the Speed Steel with 22. Hopefully get a suitable pistol up and running by then. Keen on a 7.5-inch Buckmark or a longer Ruger. the S&W are generally too expensive for me.

   Liked On: 27-04-2018, 07:25 PM

5. 
   Dynastar27 liked post by Uplandstalker On thread : 3D Printed Widgets

   OK, I can play this game too! Tikka Mag box: 78078

   Liked On: 25-04-2018, 08:38 AM

6. 
   R93 liked post by Uplandstalker On thread : River City

   Give me half an hour and I'll need picked up. The head to prefect, I'm not the one that downed two bottles of scotch! Sent from my SM-G930F using Tapatalk

   Liked On: 12-03-2018, 07:54 AM

7. 
   von tempsky fan liked post by Uplandstalker On thread : Which 6.5 ?

   Running a Model 7 in 260 that I had reamed with Mathias 30 degree reamer. As mentioned already, seating length is the likley issue (or non-issue as in my case). 140gn Berger VLD's doing 2751fps with...

   Liked On: 08-01-2018, 07:07 PM

8. 
   Mathias liked post by Uplandstalker On thread : Which 6.5 ?

   It's ideal as it sits right between a 6.5CR and a 260AI. I've only ever neck sized, but some cases are starting to get a little tight on closing the bolt. Not that I've been counting, but must have 5...

   Liked On: 08-01-2018, 04:48 PM

9. 
   jakewire liked post by Uplandstalker On thread : Which 6.5 ?

   Running a Model 7 in 260 that I had reamed with Mathias 30 degree reamer. As mentioned already, seating length is the likley issue (or non-issue as in my case). 140gn Berger VLD's doing 2751fps with...

   Liked On: 08-01-2018, 03:49 PM

10. 
    Mathias liked post by Uplandstalker On thread : Which 6.5 ?

    Running a Model 7 in 260 that I had reamed with Mathias 30 degree reamer. As mentioned already, seating length is the likley issue (or non-issue as in my case). 140gn Berger VLD's doing 2751fps with...

    Liked On: 08-01-2018, 12:31 PM

11. 
    llewelyn liked post by Uplandstalker On thread : Which 6.5 ?

    Running a Model 7 in 260 that I had reamed with Mathias 30 degree reamer. As mentioned already, seating length is the likley issue (or non-issue as in my case). 140gn Berger VLD's doing 2751fps with...

    Liked On: 08-01-2018, 12:10 PM

12. 
    Rich007 liked post by Uplandstalker On thread : 3D Printed Widgets

    OK, I can play this game too! Tikka Mag box: 78078

    Liked On: 30-10-2017, 08:14 PM

13. 
    stretch liked post by Uplandstalker On thread : 3D Printed Widgets

    OK, I can play this game too! Tikka Mag box: 78078

    Liked On: 30-10-2017, 02:34 PM

14. 
    Mathias liked post by Uplandstalker On thread : The model 7 in your life

    All done 71332 71333 71334

    Liked On: 30-06-2017, 04:35 PM

15. 
    Timmay liked post by Uplandstalker On thread : The model 7 in your life

    All done 71332 71333 71334

    Liked On: 30-06-2017, 04:34 PM

Page 14 of 52 First 12345678910111213141516171819202122232425262728 ... Last

• Jump to page: