veitnamcam
Almost literate.

33625 Likes

Page 201 of 2242 First ... 1011511871881891901911921931941951961971981992002012022032042052062072082092102112122132142152513017011201 ... Last

• Jump to page:

1. 
   veitnamcam liked post by Seventy Six On thread : Lead Contamination In Game Meat

   My opinion is that the shedded lead fragments will create bruising, and the bruised bits usually get thrown aside.

   Liked On: 06-03-2023, 06:53 PM

2. 
   veitnamcam liked post by 6.5 CRD On thread : Lead Contamination In Game Meat

   Something a few of you may find quite interesting, Take from it what you will. Bit of back story - my partner who i have got into hunting/shooting & recently just shot her first deer, and being the...

   Liked On: 06-03-2023, 06:53 PM

3. 
   veitnamcam liked post by tac a1 On thread : Box trailer weather tight door seal design - help required

   There's a really good place that I deal with for seals and bits and pieces. It's called 'Co Mac'. They have every shape of seal in creation as well as anything else you might need to build pretty...

   Liked On: 06-03-2023, 08:18 AM

4. 
   veitnamcam liked post by 7mmsaum On thread : Thanks for not nuking whole threads

   There are hundreds and hundreds and hundreds of previous threads that have posts “sniped “ out of them and they have used up hundreds of hours a year of voluntary time and effort and done in such a...

   Liked On: 06-03-2023, 08:11 AM

5. 
   veitnamcam liked post by tac a1 On thread : Gotta Ford Ranger, You might want to watch this.

   https://youtu.be/j_nh-_xBYDo Gear box issues and fixes. ( Auto's)

   Liked On: 06-03-2023, 08:08 AM

6. 
   veitnamcam liked post by dannyb On thread : How to turn it down a notch

   Wonder if it would work on children :yaeh am not durnk:

   Liked On: 06-03-2023, 08:05 AM

7. 
   veitnamcam liked post by Hall On thread : Bent timber stock.

   As I previously noted, I wonder if this has been bent on purpose. The grip is also not symmetrical, just by a few mm but still obvious. I started with a heat lamp, but only got to 35c, so went to a...

   Liked On: 05-03-2023, 09:30 PM

8. 
   veitnamcam liked post by Hunter_Nick On thread : Bent timber stock.

   Yeah difficult job to do on a stock. I haven’t done it (haven’t needed to) but I’m a stock maker and have experience bending wood when making self bows. When adding recurves or untwisting the limbs...

   Liked On: 05-03-2023, 09:24 PM

9. 
   veitnamcam liked post by mudgripz On thread : The little bunny that moved in..

   Lucky growing up now - runs the 1000m2 section like its his place! Pleased to see the little bloke/blokette survived recent roundup poisoning on some few weeds he liked to snack on.. 218131 ...

   Liked On: 05-03-2023, 09:20 PM

10. 
    veitnamcam liked post by mudgripz On thread : The little bunny that moved in..

    Nice pic Tedz. Lucky is doing well. Well established now on this urban section and thriving. Now 3/4 size and happy to come and have his breakfast while mudz practices whistles and calls at him and...

    Liked On: 05-03-2023, 09:20 PM

11. 
    veitnamcam liked post by Tedz50 On thread : The little bunny that moved in..

    218058 Sometimes their just fun to watch.

    Liked On: 05-03-2023, 09:19 PM

12. 
    veitnamcam liked post by kukuwai On thread : Fishing tomorrow!

    I will be doing the same [emoji106] Population should have built up a bit since then too ah !!! Sent from my SM-G950F using Tapatalk

    Liked On: 05-03-2023, 07:43 PM

13. 
    veitnamcam liked post by 6.5 CRD On thread : 130gr TTSX in 16" .308

    Revisiting this - Got my hands on some lapua brass & did some more testing, What a difference some decent brass made. 130gr TTSX loaded at 146 thou off jam (mag length), 49.5gr of 2206h and its up at...

    Liked On: 05-03-2023, 07:32 PM

14. 
    veitnamcam liked post by zeropak On thread : Pressure signs with factory ammo

    Brand new rifle so carbon/copper buildup will not be the issue. Not the ammo because the milder Fiocchi was giving the same pressure signs. Good point regarding the edges of the ejector holes but the...

    Liked On: 05-03-2023, 09:02 AM

15. 
    veitnamcam liked post by stingray On thread : Fishing tomorrow!

    That’s a bloody beautiful fish …..so I’ve looked at the tides for an after work flounder….Wednesday / Thursday …rising tides ..let the hunt begin!

    Liked On: 05-03-2023, 07:53 AM

Page 201 of 2242 First ... 1011511871881891901911921931941951961971981992002012022032042052062072082092102112122132142152513017011201 ... Last

• Jump to page: