veitnamcam
Almost literate.

32349 Likes

Page 251 of 2157 First ... 1512012372382392402412422432442452462472482492502512522532542552562572582592602612622632642653013517511251 ... Last

• Jump to page:

1. 
   veitnamcam liked post by kukuwai On thread : Show us your boat

   Almost big enough to transport the waggon towing it !! [emoji41] Sent from my SM-G950F using Tapatalk

   Liked On: 14-02-2022, 06:25 PM

2. 
   veitnamcam liked post by Sparrow On thread : All work……. Little bit of play!

   Starting my own business with a good mate a few months back has seen my weekend hunting passes ( and energy) greatly reduced, however being our own bosses has put us in contact with some real good...

   Liked On: 14-02-2022, 04:55 PM

3. 
   veitnamcam liked post by bunji On thread : Show us your boat

   While we had our little "Grab The Bloody Ark Noah" storm front go through last week, with at one stage 160mm falling on the farm in 4 hrs in amongst a week of rain ,while we were rained in the...

   Liked On: 14-02-2022, 04:46 PM

4. 
   veitnamcam liked post by Friwi On thread : BSA 3-lever triggers (Royal, Hunter, etc.)

   I know where a replacement extractor lives if you want one.

   Liked On: 14-02-2022, 04:42 PM

5. 
   veitnamcam liked post by garyp On thread : BSA 3-lever triggers (Royal, Hunter, etc.)

   I have a few bits and pieces for older BSA rifles here, including a couple of triggers. Just PM me and let me know what you need. Also have a Majestic extractor.

   Liked On: 14-02-2022, 04:42 PM

6. 
   veitnamcam liked post by Micky Duck On thread : BSA 3-lever triggers (Royal, Hunter, etc.)

   THAT is why this forum is such a good place,no matter the crap,folks willing to help others out makes life worth living. good on you blokes...shout yourselves a beer.

   Liked On: 14-02-2022, 04:42 PM

7. 
   veitnamcam liked post by gundoc On thread : BSA 3-lever triggers (Royal, Hunter, etc.)

   Thats a new trick! He must have tried to unscrew the barrel while the bolt was in place. Unforgiveable!

   Liked On: 14-02-2022, 04:40 PM

8. 
   veitnamcam liked post by gundoc On thread : BSA 3-lever triggers (Royal, Hunter, etc.)

   One of the triggers I cut my teeth on when I started professional gunsmithing more than 50 years ago was the 3-lever BSA trigger as found on the Royal, Viscount, Hunter, and early Majestic rifles,...

   Liked On: 14-02-2022, 04:38 PM

9. 
   veitnamcam liked post by Ross Nolan On thread : Silly boy and an eel

   Outstanding. You can tell some people, and some just have to pee on the electric fence themselves......

   Liked On: 14-02-2022, 01:47 PM

10. 
    veitnamcam liked post by Ryan_Songhurst On thread : Silly boy and an eel

    I've been bitten by one when I was a young fella, wading under some willows with my arms outstretched above the water and it latched onto my armpit, squealed like a girl for quite a while untill we...

    Liked On: 14-02-2022, 01:46 PM

11. 
    veitnamcam liked post by Rushy On thread : Silly boy and an eel

    Classic alright! I recall a similar childhood incident to Ingrid51 up the Wentworth Valley out from Whangamata. My younger brother and I were out eeling with two of my cousins. Our ages would have...

    Liked On: 14-02-2022, 01:45 PM

12. 
    veitnamcam liked post by Ingrid 51 On thread : Silly boy and an eel

    I had a similar experience as a kid. After seeing a large eel in a drain, I put the muzzle of my .17 BSA Meteor near its head and fired a slug. The eel thrashed about, making water murky, so I put my...

    Liked On: 14-02-2022, 01:45 PM

13. 
    veitnamcam liked post by 223nut On thread : 223 on deer

    190204 190205 Entry wound after skinning, head down feeding 50-60m. 55gr fioochi soft point (factory box doesn't give any other details) 223 t3 1/8 twist barrel cut down short (can't recall length...

    Liked On: 14-02-2022, 12:49 PM

14. 
    veitnamcam liked post by Bobba On thread : Dodgy recoil lug

    Made a start on grinding out the stock in between power cuts. Gone as far as I can without action screws to line it up nicely and finish up the edges. Hopefully sort something this week.190191

    Liked On: 14-02-2022, 07:47 AM

15. 
    veitnamcam liked post by Bobba On thread : Dodgy recoil lug

    Thanks Cigar. Will look into those. Came out pretty good I reckon. 190030

    Liked On: 14-02-2022, 07:46 AM

Page 251 of 2157 First ... 1512012372382392402412422432442452462472482492502512522532542552562572582592602612622632642653013517511251 ... Last

• Jump to page: