What is really telling is that COLFO and Nicole Mckee are repeatedly referred to as 'lobbyists', while for GCNZ they use the term 'advocate'. Quite interesting choice by Newshub, but it was good...
Liked On: 31-01-2024, 05:57 PM
Hi Guys, We now have available neoprene suppressor sleeves available in green. These can be purchased through your local hunting shop, or directly from us. 242401 Darren
Liked On: 25-01-2024, 07:03 PM
FAL Holder that owns said firearm
Liked On: 25-01-2024, 07:00 PM
Thanks for all the info on this thread. After an assessment of my situation as a whole, I ended up going for a new Tikka in 7mm RM. So new setup will be Tikka 7mm RM Full 24 inch barrel (can cut...
Liked On: 20-01-2024, 08:32 PM
Just did a CDS equivalent for the sightron S-Tac Pretty happy with how it turned out Actually prefer the sightron to my VX5HD (Printed a zero stop for it too which works awesome) Now to see...
Liked On: 16-01-2024, 07:01 AM
Great fishing, but this time of year the sandflies will drive you absolutely mental.
Liked On: 14-01-2024, 04:12 PM
witchcraft the molesworth/Acheron rd doesn't allow vehicles over 7m or towing caravans, however we did pass stock truck and trailer unit and i think the road is fine to tow on. The rainbow...
Liked On: 14-01-2024, 04:12 PM
I was going to take our Jayco from Hanmer to St James homestead. One mate said ‘you couuuuuld do it, but…’ whilst another stated he’s towed his van to St James on several occasions. The road can be...
Liked On: 14-01-2024, 04:12 PM
https://www.youtube.com/watch?v=1rvGCwdNIE4&t=402s As long as you remember no shotgun when using the can, all good. I'm in awe of the engineering capabilities of the guy who dreamed this up....
Liked On: 11-01-2024, 05:12 PM
Can't help with the post, but as far as my understanding of the current legislation as it stands - the two forms of licensing set down in the Arms Act are relicensing of currently licensed persons...
Liked On: 10-01-2024, 05:05 PM
I opened this thread because I too am curious as to how to identify a hind that can be harvested ethically. A fawn starving to death over an extended period of time is unacceptable to me, not to...
Liked On: 03-01-2024, 03:11 PM
I had taken to much of the outside of the hammer so re ground the inside to get better engagement this worked well, created another issue when cooked and Safety on then pull the trigger the sear was...
Liked On: 03-01-2024, 07:27 AM
I’ve had it in my HMR, can’t remember which one, I’ve owned four of them. Projectile half way down barrel, I picked up the different noiseand checked, powder was black, still in the case. I think...
Liked On: 03-01-2024, 07:16 AM
Don’t blame the rifle for split necks Some HMR brass hasn’t been annealed before sizing to 17 cal and the brass is as brittle as Add in galvanic corrosion “sticking” the projectile in the neck...
Liked On: 03-01-2024, 07:16 AM
Interesting I ran that and the grenhall that it's based on and both fail the 220 gr. You have to remember as rotational speed decreases gyroscopic stability does as well and it's common to see a...
Liked On: 01-01-2024, 12:34 PM