A baffle strike due to misalignment is more dangerous, but your point is still good. I think what needs to be noted here is that most rifles and a lot of suppressors don't list the muzzle thread...
Liked On: 30-01-2025, 05:25 PM
Thank goodness I opened this thinking please no pictures, please no pictures
Liked On: 30-01-2025, 05:14 PM
14x1 male thread has a allowable outside diameter of 13.862-13.974mm 15x1 female thread has a allowable inside diameter of 13.917-14.153mm A 14x1 male thread at the high end of the range attached...
Liked On: 29-01-2025, 08:54 PM
Hey all, Dan here, GC Wellington and Palmy manager here. To clear up any of the speculation, it was a mistake on our team members end. Nothing to do with the quality of the gear - when the rifle was...
Liked On: 28-01-2025, 09:00 PM
It's not reasonable for a buyer to have to check that threads are in-spec before buying an item. That's a failure on the part of the manufacturer/seller (regardless of who that happens to be)
Liked On: 28-01-2025, 02:23 PM
Greetings, Or you could just measure it. With your rifle in a vice and carefully trained on a mark you can fix a tape to the target and read of the drops. Simple. No opinions or guesses. GPM.
Liked On: 28-01-2025, 02:16 PM
Rifle: .303 SMLE sporterised Range: 100m (ish. Paced out with long strides.) Optic: Not really an optic. A round hole in a bit of metal soldered onto the receiver. Probably from a washer of some...
Liked On: 25-01-2025, 03:23 PM
Hi, I'm Tasman (the guy with the YouTube channel NZ Wild Adventures), figured I'd hop on here and say hi! A few members have sent through a couple NZHS threads about the channel, just wanted to say...
Liked On: 24-01-2025, 09:30 PM
My 308 zerod at 200yds is 1.5"H at a 100yds But I like 2.5H as this gives me nearly 280yds zero,6" drop at 350yds,12" at 400yds. Ammo is Hornady 150gr ssts doing 2836ft/s. On end of scope is a...
Liked On: 24-01-2025, 04:40 PM
No need to dial. With a 200 yard zero and reasonable 140 grn factory ammo out to 400 yards you shouldn't have any daylight under the crosshairs. Always have the crosshairs on the animal. At 350-400...
Liked On: 22-01-2025, 04:31 PM
After a run in with a dickhead neighbour trying to report our GSP as aggressive and attacking his dog. Which sparked dog control into coming around and investigating findi g nothing wrong (apparently...
Liked On: 20-01-2025, 05:01 PM
Man, you guys make it really really hard for us 1990's Nissan patrol/Toyota Landcruiser guys to look forward to a new truck! The power and bells and whistles may be fine and dandy, but the gremlins...
Liked On: 19-01-2025, 07:52 AM
DMAX have their issues, I think the latest ones have an issue with the front upper control arms which causes excessive front tyre wear. But they have the mighty 4JJ3 engine. Out of those two...
Liked On: 19-01-2025, 07:49 AM
That belt grip is amazing. It turns an old squeaky belt into a mess that takes ages to clean out, and still needs another belt
Liked On: 15-01-2025, 04:32 PM
Yeah, if you piece together a setup you can do it for a lot less basically welding up your own axles etc but the thing with that gear as a kit is it all turns up ready to go (as long as it fits your...
Liked On: 08-01-2025, 04:44 PM