Have set mine off 3x over the years, none of the activations for me personally. 1: For a woman tramper who was in anaphylactic stress, her airway was compromised after bee stings. She was allergic...
Liked On: 22-10-2024, 08:38 PM
Yep. In the workshop, on vineyards and orchards we run yellow containers for diesel, red for straight petrol and green for two stroke mix plus bulk tanks for diesel and petrol. Staff still manage to...
Liked On: 19-10-2024, 09:55 AM
Yep. In the workshop, on vineyards and orchards we run yellow containers for diesel, red for straight petrol and green for two stroke mix plus bulk tanks for diesel and petrol. Staff still manage to...
Liked On: 19-10-2024, 07:27 AM
Any more than 10% petrol in diesel fuelled engine and you’re into danger territory. Fukin amazing how many people cock this up when they’re in a rush or distracted. A mate of mine did it twice with...
Liked On: 18-10-2024, 09:00 PM
If the torch’s have got 1000m range that’s plenty to light up animals and background. If you’re shooting at night, on private property, you should be aware of backdrops/danger areas through prior...
Liked On: 17-10-2024, 06:58 PM
We all try to set our FL die to work the brass as little as possible eg. neck only or just shoulder bump. All well and good for that one rifle chamber but the moment you do cases for some other rifle...
Liked On: 16-10-2024, 11:28 AM
We've probably all done it at some stage if we're completely honest with ourselves Micky Duck.
Liked On: 15-10-2024, 09:52 PM
That's why you should Full Length resize any brass you use of unknown origin so they are within SAAMI Cartridge specs. and then probably try chambering in the intended rifle before carrying on with...
Liked On: 15-10-2024, 09:51 PM
We've probably all done it at some stage if we're completely honest with ourselves Micky Duck.
Liked On: 15-10-2024, 08:40 PM
We've probably all done it at some stage if we're completely honest with ourselves Micky Duck.
Liked On: 15-10-2024, 08:14 PM
That's why you should Full Length resize any brass you use of unknown origin so they are within SAAMI Cartridge specs. and then probably try chambering in the intended rifle before carrying on with...
Liked On: 15-10-2024, 08:13 PM
Shit, I don’t know what happened there but somehow what I typed and what I quoted has merged into a nonsensical post upon posting. I will try and redo what I wanted to say shortly.
Liked On: 15-10-2024, 07:30 PM
A lot of cheap measuring gear that a lot of people have would barely be accurate enough to measure 5 thou. difference. Haven’t seen a Lee trim gauge that doesn’t trim to length when screwed into...
Liked On: 15-10-2024, 06:51 PM
A lot of cheap measuring gear that a lot of people have would barely be accurate enough to measure 5 thou. difference. Haven’t seen a Lee trim gauge that doesn’t trim to length when screwed into...
Liked On: 15-10-2024, 03:50 PM
“You kind of have to run them into the lee whackamole dies again in order prime them and seat the bullet using the lee classic loader sets. It wont really change the shape of the brass much as the...
Liked On: 15-10-2024, 01:07 PM