I recently worked a load in my S&L 308win. 25" bbl. ELD-X 178gn. 2208. 2620fps. 0.3 & 0.5 moa groups at 300. Retained v and e look pretty good.
Liked On: 10-11-2020, 08:54 PM
153200
Liked On: 08-11-2020, 06:14 PM
153200
Liked On: 08-11-2020, 12:16 PM
I would like to know too please.
Liked On: 04-11-2020, 05:07 PM
Just keep them clean and oiled. No problem. If I'm going into some really shitty conditions I rub vaseline well into all exterior steel as well.
Liked On: 02-11-2020, 06:41 PM
Your brass is probably not Nosler in which case their reloading specs will not apply. At the very least, as others have recommended, drop back 10% to 57 grains and do a ladder at 0.3 grain steps up...
Liked On: 01-11-2020, 06:06 PM
Just keep them clean and oiled. No problem. If I'm going into some really shitty conditions I rub vaseline well into all exterior steel as well.
Liked On: 01-11-2020, 10:13 AM
Just keep them clean and oiled. No problem. If I'm going into some really shitty conditions I rub vaseline well into all exterior steel as well.
Liked On: 01-11-2020, 07:36 AM
You can remove the bullets safely and without damage by using a hornady bullet pulker fitted with appropriate colket for your calibre. Did you trim your brass to the correct kength as specified in...
Liked On: 29-10-2020, 10:48 PM
A little rem mod 7 or mohawk would be ideal and no modification needed. Thompson Conteder in 308 is compact and very accurate with rem 150 corlokts and very cheap.
Liked On: 29-10-2020, 10:32 PM
Newsroom: DoC reviews ‘nonsense’ media permits. https://www.newsroom.co.nz/doc-reviews-nonsense-media-permits
Liked On: 29-10-2020, 06:47 PM
Thinking also of our hunting programs like Duley's and RSHClub. Showing culled Tahr or Grafs showing the green rain; marine reserves, aerial goose culls. Imagine , who pays for some DOC minion to...
Liked On: 29-10-2020, 06:12 PM
Each 4 shot test is only 1/2 grain up to he will still get a ladder. One other suggestion is that sandbags are used for consistent support both front and rear in order to minimise shooter error.
Liked On: 29-10-2020, 04:24 PM
You will get a better picture of differences shot to shot.
Liked On: 29-10-2020, 02:38 PM
A little rem mod 7 or mohawk would be ideal and no modification needed. Thompson Conteder in 308 is compact and very accurate with rem 150 corlokts and very cheap.
Liked On: 29-10-2020, 08:20 AM