zeropak
Member

812 Likes

Page 25 of 55 First ... 1112131415161718192021222324252627282930313233343536373839 ... Last

• Jump to page:

1. 
   dannyb liked post by zeropak On thread : Garmin Xero® C1 Pro Chronograph

   Interestingly I have used a magnetospeed on my rifles, all suppressed so the unit attaches to the suppressor (not sure if that makes a difference) at 100m I did not detect any impact shift or change...

   Liked On: 15-01-2024, 03:14 PM

2. 
   Shamus_ liked post by zeropak On thread : Garmin Xero® C1 Pro Chronograph

   Interestingly I have used a magnetospeed on my rifles, all suppressed so the unit attaches to the suppressor (not sure if that makes a difference) at 100m I did not detect any impact shift or change...

   Liked On: 15-01-2024, 03:12 PM

3. 
   timattalon liked post by zeropak On thread : 6.5x55 accuracy

   If the Handloads are grouping Ok and the factory loads wont hit a cardboard box it feel to me like something else is going on here. I agree handloads can be more accurate than factory ammo but this...

   Liked On: 15-01-2024, 11:14 AM

4. 
   Micky Duck liked post by zeropak On thread : 6.5x55 accuracy

   If the Handloads are grouping Ok and the factory loads wont hit a cardboard box it feel to me like something else is going on here. I agree handloads can be more accurate than factory ammo but this...

   Liked On: 14-01-2024, 06:16 PM

5. 
   Hugh Shields liked post by zeropak On thread : 6.5x55 accuracy

   If the Handloads are grouping Ok and the factory loads wont hit a cardboard box it feel to me like something else is going on here. I agree handloads can be more accurate than factory ammo but this...

   Liked On: 14-01-2024, 04:29 PM

6. 
   Tahr liked post by zeropak On thread : 6.5x55 accuracy

   If the Handloads are grouping Ok and the factory loads wont hit a cardboard box it feel to me like something else is going on here. I agree handloads can be more accurate than factory ammo but this...

   Liked On: 14-01-2024, 04:25 PM

7. 
   Hugh Shields liked post by zeropak On thread : 223 Lapua brass

   Close. I'm running the 75 and 73gn ELDM's Nosler Brass Fed 205 Primer and 25gns of 2208. This is a compressed load which I worked up to. Velocity is 2795 out of a 20" barrel in my Tikka T3x....

   Liked On: 13-01-2024, 01:27 PM

8. 
   Davey liked post by zeropak On thread : 22LR Technique or Rifle Issue?

   Rimfire rifles are very susceptible to impact changes caused by different degrees of pressure on the stock. Your rifle should shoot Ok resting over bags, after all that's what the bench rest...

   Liked On: 13-01-2024, 07:06 AM

9. 
   RV1 liked post by zeropak On thread : Wet aging

   I don't believe you should empty the residual blood out of the bag part way through the process. It would be a bit of a pain in the arse to do plus not really required. The residual liquid in the bag...

   Liked On: 06-01-2024, 12:13 AM

10. 
    Ranger 888 liked post by zeropak On thread : 22LR Technique or Rifle Issue?

    Rimfire rifles are very susceptible to impact changes caused by different degrees of pressure on the stock. Your rifle should shoot Ok resting over bags, after all that's what the bench rest...

    Liked On: 05-01-2024, 09:22 PM

11. 
    Magnetite liked post by zeropak On thread : 22LR Technique or Rifle Issue?

    Rimfire rifles are very susceptible to impact changes caused by different degrees of pressure on the stock. Your rifle should shoot Ok resting over bags, after all that's what the bench rest...

    Liked On: 29-12-2023, 10:20 PM

12. 
    mudgripz liked post by zeropak On thread : 22LR Technique or Rifle Issue?

    Rimfire rifles are very susceptible to impact changes caused by different degrees of pressure on the stock. Your rifle should shoot Ok resting over bags, after all that's what the bench rest...

    Liked On: 29-12-2023, 10:54 AM

13. 
    dannyb liked post by zeropak On thread : What Sling?

    Another vote for the Niggeloh, Not the cheapest out there but the best sling I own by far.

    Liked On: 28-12-2023, 09:04 AM

14. 
    ando2506 liked post by zeropak On thread : Broke my bolt

    Pull the cocking piece back and twist so that the sear on the bolt engages the back of the bolt, You may need to use the edge of a wooden work bench to push the bolt sear back and the twist. There...

    Liked On: 24-12-2023, 09:47 PM

15. 
    Hugh Shields liked post by zeropak On thread : Broke my bolt

    Pull the cocking piece back and twist so that the sear on the bolt engages the back of the bolt, You may need to use the edge of a wooden work bench to push the bolt sear back and the twist. There...

    Liked On: 23-12-2023, 10:21 PM

Page 25 of 55 First ... 1112131415161718192021222324252627282930313233343536373839 ... Last

• Jump to page: