zeropak
Member

812 Likes

Page 43 of 55 First ... 293031323334353637383940414243444546474849505152535455 Last

• Jump to page:

1. 
   hey liked post by zeropak On thread : Sourcing reloading components

   Thanks for the offer its much appreciated in the times of short supply. I have managed to get a fairly decent amount of RWS magnum primers of another member so in the interests of working up a load...

   Liked On: 13-03-2023, 09:07 PM

2. 
   XR500 liked post by zeropak On thread : April Fools get together - Central North Island

   I'll be keen on that, will work towards making that date free and creating other excuses for traveling south.

   Liked On: 12-03-2023, 02:04 PM

3. 
   Micky Duck liked post by zeropak On thread : Pressure signs with factory ammo

   Right, so I just got back from the range and here's what I discovered. Even with a squeeky clean chamber the Hornady superformance 129gn SST's were showing pressure signs. Tight bolt lift and ejector...

   Liked On: 05-03-2023, 04:16 PM

4. 
   Oldbloke liked post by zeropak On thread : Pressure signs with factory ammo

   Brand new rifle so carbon/copper buildup will not be the issue. Not the ammo because the milder Fiocchi was giving the same pressure signs. Good point regarding the edges of the ejector holes but the...

   Liked On: 05-03-2023, 10:56 AM

5. 
   veitnamcam liked post by zeropak On thread : Pressure signs with factory ammo

   Brand new rifle so carbon/copper buildup will not be the issue. Not the ammo because the milder Fiocchi was giving the same pressure signs. Good point regarding the edges of the ejector holes but the...

   Liked On: 05-03-2023, 09:02 AM

6. 
   PipIstrelle liked post by zeropak On thread : Pressure signs with factory ammo

   Brand new rifle so carbon/copper buildup will not be the issue. Not the ammo because the milder Fiocchi was giving the same pressure signs. Good point regarding the edges of the ejector holes but the...

   Liked On: 04-03-2023, 09:43 PM

7. 
   Tahr liked post by zeropak On thread : Pressure signs with factory ammo

   Oh Ok. I think there is more going on than that. Considering the hard tight to lift bolt and shots going wide of the group.

   Liked On: 04-03-2023, 05:05 PM

8. 
   chainsaw liked post by zeropak On thread : Suppressor rear bush sizing

   Yep I get that. solid consistent contact or no contact at all should work. But partial or variable contact would most likely cause accuracy issues.

   Liked On: 28-02-2023, 08:28 AM

9. 
   veitnamcam liked post by zeropak On thread : Suppressor rear bush sizing

   Yep I get that. solid consistent contact or no contact at all should work. But partial or variable contact would most likely cause accuracy issues.

   Liked On: 28-02-2023, 07:36 AM

10. 
    Fssprecision liked post by zeropak On thread : Suppressor rear bush sizing

    Yep I get that. solid consistent contact or no contact at all should work. But partial or variable contact would most likely cause accuracy issues.

    Liked On: 27-02-2023, 09:42 PM

11. 
    Rated M for Magnum liked post by zeropak On thread : 6.5 143 ELD-X, are they THE 6.5 hunting bullet?

    The 143gn ELDX looks like THE Projectile for the 6.5 calibre. I shoot a 6.5 Creedmoor and use factory ammo. I have been mainly using the Hornady superformance 129gn SST. I recently bought a couple...

    Liked On: 13-02-2023, 02:14 AM

12. 
    MB liked post by zeropak On thread : Lesson Learnt - Cheap Rings

    Find yourself a set of medium height Talley rings. medium will give enough clearance for the 50mm objective. Ring and base all one piece, very simple design and they work. About $115 for a set so...

    Liked On: 14-01-2023, 11:28 PM

13. 
    Micky Duck liked post by zeropak On thread : shooting sticks

    Yes it does. Squeeze the trigger on the trigger stick and the legs will extend to where they hit ground. So each leg can go to different extension length. Uneven ground is no problem.

    Liked On: 14-01-2023, 11:22 PM

14. 
    lau lau liked post by zeropak On thread : Lesson Learnt - Cheap Rings

    Find yourself a set of medium height Talley rings. medium will give enough clearance for the 50mm objective. Ring and base all one piece, very simple design and they work. About $115 for a set so...

    Liked On: 14-01-2023, 09:21 PM

15. 
    dannyb liked post by zeropak On thread : Lesson Learnt - Cheap Rings

    Find yourself a set of medium height Talley rings. medium will give enough clearance for the 50mm objective. Ring and base all one piece, very simple design and they work. About $115 for a set so...

    Liked On: 14-01-2023, 08:01 PM

Page 43 of 55 First ... 293031323334353637383940414243444546474849505152535455 Last

• Jump to page: