That's good if you have lots of disposable income and a stock of barrel blanks in your cupboard plus a good gunsmith just waiting to do your rebarreled. Also barrels, particularly in the hot 6.5s...
Liked On: 05-01-2020, 12:41 PM
Long since pensioned off my Parker Hale rods. Now use Boretech coated, Tipton carbon fibre. Not a fan of stainless uncoated rods although the SS fans will argue the coated ones like Boretech...
Liked On: 27-12-2019, 09:20 PM
Why would you launch into using that tool if you haven't done some basic measurements to understand the nature of the problem?
Liked On: 27-12-2019, 07:00 PM
Will have a fiddle tomorrow arvo. Anyone else out there able to run thru QL so we can compare results?
Liked On: 26-12-2019, 10:03 PM
Mate had an old guy in the rifle club ask him if he would anneal his cases for him. Mate said yeah yeah bring them around just make sure they are all deprimed though. Half way thru the annealing,...
Liked On: 26-12-2019, 06:20 PM
I still check lot to lot but don't find Bergers for example to be too inconsistant. Hornady a little less so. However, Berger could now drop the ball now they are owned by Nammo and are having...
Liked On: 26-12-2019, 11:15 AM
Why would you launch into using that tool if you haven't done some basic measurements to understand the nature of the problem?
Liked On: 26-12-2019, 11:02 AM
Why would you launch into using that tool if you haven't done some basic measurements to understand the nature of the problem?
Liked On: 26-12-2019, 10:54 AM
Take vernier (all handloaders have a vernier don't they) and measure depth of primer pocket. LRP pockets run around 130 thou depending on brass brand. Measure primer thickness. There is quite a...
Liked On: 26-12-2019, 10:06 AM
The bit I bent (ejector) affected how high the cartridges sat in the mag once the mag was inserted in the gun. It held them down off the mag lips and although the breech bolt still picked them up on...
Liked On: 22-12-2019, 04:15 PM
Beat me too it. Spread evenly out on lawn. I had a bad experience with milsurp 4895 many years ago. Had always been stored correctly but it suddenly "off" as in popped the lid off one of the cans...
Liked On: 20-12-2019, 12:38 PM
Beat me too it. Spread evenly out on lawn. I had a bad experience with milsurp 4895 many years ago. Had always been stored correctly but it suddenly "off" as in popped the lid off one of the cans...
Liked On: 20-12-2019, 11:19 AM
Similar to EBF recommendations. I'm shooting a Lithgow and an old Anschutz Match 54 SB rifle, scoped. Have had incredible groups with the humble CCI SV at 100 yds. Just get the occasional flier...
Liked On: 17-12-2019, 11:03 PM
Here is a boolit produced by a genuine Tony Hawkins mould. When you purchased one of his rifles you usually purchased his mould as well. My cousin shot very successfully in BP comps with a Tony...
Liked On: 09-12-2019, 05:02 PM
Stuff
Liked On: 04-12-2019, 08:35 AM