Labradar parent company here Our history (http://www.infinition.com/site/index.php/us/about-us-en-us/our-mission-en-us) They do some seriously clever shit. I see one device they make that can...
Liked On: 15-07-2017, 10:33 PM
Not much help Puffin because my load development for my 6.5x47L was a doodle and I never stretched the envelop to find the last higher velocity node. Just wasn’t necessary and I had no desire to go...
Liked On: 13-07-2017, 06:49 PM
Not much help Puffin because my load development for my 6.5x47L was a doodle and I never stretched the envelop to find the last higher velocity node. Just wasn’t necessary and I had no desire to go...
Liked On: 13-07-2017, 02:31 PM
Not much point. As per the original post they are on back order. Looked myself. Or you could maybe contact Mike or Addison @ RIL at any rate for estimate of when they will be available. Even if you...
Liked On: 13-07-2017, 02:26 PM
One full turn on standard 14 TPI dies will give you ~1.8mm change, so 1/4 will be ~0.45mm. For your situation I would start at 0.5mm (20 thou) off jam so 1/4 turn is as near as damn it is to swearing.
Liked On: 11-07-2017, 10:56 PM
One full turn on standard 14 TPI dies will give you ~1.8mm change, so 1/4 will be ~0.45mm. For your situation I would start at 0.5mm (20 thou) off jam so 1/4 turn is as near as damn it is to swearing.
Liked On: 10-07-2017, 07:45 AM
One full turn on standard 14 TPI dies will give you ~1.8mm change, so 1/4 will be ~0.45mm. For your situation I would start at 0.5mm (20 thou) off jam so 1/4 turn is as near as damn it is to swearing.
Liked On: 09-07-2017, 08:11 PM
Mate I will put money on it that they will not commit themselves in writing. It's just not how the game is played :P Best of luck at any rate.
Liked On: 07-07-2017, 10:04 PM
Woldwide by volume maybe Mahindra. Worldwide by value probably JD. Don't know about NZ but there is a lot of green around. All the local growers seem to run JD. "Mahindra*Tractors is an...
Liked On: 07-07-2017, 12:33 PM
It's so far from the range you would need to run shuttle buses - that's the whole ridiculous thing about the protests.
Liked On: 04-07-2017, 08:10 AM
It's so far from the range you would need to run shuttle buses - that's the whole ridiculous thing about the protests.
Liked On: 03-07-2017, 08:38 PM
It's so far from the range you would need to run shuttle buses - that's the whole ridiculous thing about the protests.
Liked On: 03-07-2017, 08:30 PM
It's so far from the range you would need to run shuttle buses - that's the whole ridiculous thing about the protests.
Liked On: 03-07-2017, 07:59 PM
Have you fired it yet and what is extraction like. What is the rest of the barrel interior like? You can polish a chamber with a piece of wooden dowel and very fine grinding paste but you will never...
Liked On: 03-07-2017, 06:49 PM
Have you fired it yet and what is extraction like. What is the rest of the barrel interior like? You can polish a chamber with a piece of wooden dowel and very fine grinding paste but you will never...
Liked On: 03-07-2017, 03:23 PM