zimmer
Member

2535 Likes

Page 137 of 169 First ... 3787123124125126127128129130131132133134135136137138139140141142143144145146147148149150151 ... Last

• Jump to page:

1. 
   P38 liked post by zimmer On thread : Flat primers

   Ditto what veitnamcam said. Also primers can end up flat (with moderate loads) if your cases are a bit floppy in the chamber – usually with new brass in a larger than spec chamber or often after...

   Liked On: 05-03-2017, 03:41 PM

2. 
   Maca49 liked post by zimmer On thread : Flat primers

   The indicators are not really that complex. Here’s a situation that I have personally seen other shooters (plural events) up to – Hammering the bolt open with a block of wood. (On some rifles...

   Liked On: 05-03-2017, 03:40 PM

3. 
   rossi.45 liked post by zimmer On thread : where to buy Jewell HVR trigger for REM700 for best price

   I got my first Jewell approximately 20 years ago, bought at a time when Jewell was THE trigger. I bought mine direct from one of Arnold Jewell’s sons. Basically rang them, discussed spring...

   Liked On: 03-03-2017, 02:04 PM

4. 
   northdude liked post by zimmer On thread : Suppressors, what recommendations do you all have?

   Yeah, MAE tend to get overlooked don't they? I have one also, an excellent highly efficient can if maybe a tad heavy. MAE probably focus more on their exporting. Found a complimentary reference...

   Liked On: 01-03-2017, 09:59 PM

5. 
   6x47 liked post by zimmer On thread : Confused! Shooting off bipod good, off bags bad.

   Ha ha agree 100%. I think I detect Nathan Foster there somewhere in the back ground with "hold that fore end". It's all about repeating exactly the same hold shot for shot isn't it. :( Shot one...

   Liked On: 01-03-2017, 07:18 AM

6. 
   Puffin liked post by zimmer On thread : Confused! Shooting off bipod good, off bags bad.

   Ha ha agree 100%. I think I detect Nathan Foster there somewhere in the back ground with "hold that fore end". It's all about repeating exactly the same hold shot for shot isn't it. :( Shot one...

   Liked On: 28-02-2017, 11:03 PM

7. 
   Jexla liked post by zimmer On thread : Gun confiscated as Marlborough farmers battle quake trauma

   I think you have got him wrong - he is supportive of the removal and what police and others are trying to do to help but feels the article itself had a negative slant. I had to read the posting...

   Liked On: 27-02-2017, 03:39 PM

8. 
   .300 RUM Guy liked post by zimmer On thread : Good Kiwi buggers making stuff.

   Yeah? Admittadly this report is a year old and there may have been an amazing change https://www.cnet.com/news/low-wages-and-long-hours-still-persist-at-iphone-factory-claims-labor-group/ Also...

   Liked On: 25-02-2017, 01:02 PM

9. 
   .300 RUM Guy liked post by zimmer On thread : Good Kiwi buggers making stuff.

   Sorry Friwi, but as far as Truflite is concerned I will stick with my Shilens, Liljas, Bartleins which in most cases have ended up cheaper and superior than the local mans. Hardy excepted.

   Liked On: 25-02-2017, 12:57 PM

10. 
    Marty Henry liked post by zimmer On thread : Shooter App updated today, now it's well fucked up

    +1 Well done for getting a response out of him - better than I achieved a couple of years ago from the man. As an aside this http://www.jbmballistics.com/ballistics/calculators/calculators.shtml...

    Liked On: 22-02-2017, 10:11 PM

11. 
    Tikka7mm08 liked post by zimmer On thread : 7mmSaum Load Ratio in Model 7

    64278

    Liked On: 22-02-2017, 12:41 PM

12. 
    Tikka7mm08 liked post by zimmer On thread : 7mmSaum Load Ratio in Model 7

    Mine's is pretty crude - a piece of straight copper pipe left over from my house build. A funnel cut as required and epoxied to the tube. The secret then is to tip the powder into the funnel and...

    Liked On: 22-02-2017, 12:41 PM

13. 
    veitnamcam liked post by zimmer On thread : 7mmSaum Load Ratio in Model 7

    Have you tried a long drop tube? I have a home made drop tube about 500mm long and I can get around 1.5mm further settle (depending on powder) in a 284 sized case.

    Liked On: 22-02-2017, 06:41 AM

14. 
    nevereadyfreddy liked post by zimmer On thread : 7mmSaum Load Ratio in Model 7

    Have you tried a long drop tube? I have a home made drop tube about 500mm long and I can get around 1.5mm further settle (depending on powder) in a 284 sized case.

    Liked On: 22-02-2017, 03:38 AM

15. 
    Gibo liked post by zimmer On thread : SECTIONAL DENSITY

    1. Animals fall down reliably if a vital organ is destroyed, regardless of sectional density of the bullet. 2. Animals fall down reliably if the bullet retains enough weight and has enough speed...

    Liked On: 21-02-2017, 10:17 PM

Page 137 of 169 First ... 3787123124125126127128129130131132133134135136137138139140141142143144145146147148149150151 ... Last

• Jump to page: