Just had another quick (ha ha) look - on my version the edit icon is 1/3 down the rhs. The icon beside the powder is just a picture of the type of granules. On the previous QL version there is no...
Liked On: 18-01-2017, 10:20 AM
On my version it is the icon 1/3 down on the rhs - click on that and everything editable is ungreyed and you can edit powder parameters and enter temperature compensation. Took me some time to find...
Liked On: 18-01-2017, 10:19 AM
Or ChemSet but they are permanent and need cutting off flush if moving to tidy up.
Liked On: 18-01-2017, 10:19 AM
62383 62380 62381 62382
Liked On: 18-01-2017, 08:54 AM
62383 62380 62381 62382
Liked On: 17-01-2017, 11:21 PM
62383 62380 62381 62382
Liked On: 17-01-2017, 10:04 PM
Might be of interest……..long story. Recently I had a self induced disaster – I broke the tip off the extractor claw on my Savage 22 Hornet (currently my favorite toy). I did a careless thing,...
Liked On: 17-01-2017, 10:02 PM
Might be of interest……..long story. Recently I had a self induced disaster – I broke the tip off the extractor claw on my Savage 22 Hornet (currently my favorite toy). I did a careless thing,...
Liked On: 17-01-2017, 09:10 PM
62383 62380 62381 62382
Liked On: 17-01-2017, 09:10 PM
Initially go KISS. If is happens when not firing as well that is good. Mark the base in one spot with a felt tipped marker or just use the first letter of the case makers name. Insert case with...
Liked On: 17-01-2017, 08:26 PM
Initially go KISS. If is happens when not firing as well that is good. Mark the base in one spot with a felt tipped marker or just use the first letter of the case makers name. Insert case with...
Liked On: 17-01-2017, 02:18 PM
Not a fan of the long socket method despite all the posts saying how well it works. It doesn’t give the consistency that I need. I have a Bench Source annealer with twin burners and a CAC 308 case...
Liked On: 16-01-2017, 01:11 PM
Picture of cases overheated 62214 The low temp Omegalaq (tempilaq alterative) was applied 2/3 the way up from the base to the start of the shoulder, the high temp was applied up the rest. No laq...
Liked On: 15-01-2017, 06:19 PM
Spot on. Here is a photo of 308 ADI brass cooked to perfection. I changed my flame distance a tad so had to increase the time. They look like factory Lapua :thumbsup: 62215
Liked On: 15-01-2017, 06:19 PM
Got mine here Temperature Indicating Lacquers (http://www.omega.com/subsection/temperature-indicating-lacquers.html) They were good to deal with and no issues with exporting or receiving at this end...
Liked On: 15-01-2017, 05:29 PM