zimmer
Member

2610 Likes

Page 162 of 174 First ... 62112148149150151152153154155156157158159160161162163164165166167168169170171172173174 Last

• Jump to page:

1. 
   FlukeShot liked post by zimmer On thread : Any one know if the BSA CF2 308 is short, Med or long action?

   According to Frank de Haas's book the CF2 action was the same length from 222 to 300mag. I had a late model and it was disappointingly the same I think. Mine was in 222 and had a big spacer in the...

   Liked On: 01-05-2016, 12:43 AM

2. 
   Ranal liked post by zimmer On thread : SileNZ Carbine suppressor.........whose got one?

   Nice one Donald, someone with first hand experience with an OP's question has replied. :thumbsup:

   Liked On: 27-04-2016, 01:19 AM

3. 
   Kscott liked post by zimmer On thread : Target Camera

   A bit anaemic @ only 500yd and expensive. The one I am building uses 1000 meter line of sight AV Tx Rx units. Looked at 2k units as well for about the same price. This posting was my inspiration...

   Liked On: 25-04-2016, 04:47 PM

4. 
   Gibo liked post by zimmer On thread : Neck turning

   And those benefits and downsides are......

   Liked On: 21-04-2016, 04:00 PM

5. 
   Gibo liked post by zimmer On thread : Neck turning

   Gibo just want to ask why you wish to neck turn? Don't get me wrong, I am well into neck turning, but don't see such a need for hunting reloading. The brass I do neck turn however is all then sized...

   Liked On: 21-04-2016, 02:25 PM

6. 
   Matt2308 liked post by zimmer On thread : Importing barrel blanks

   It is not true to say that Border Barrels is gone. They still exist as Border Barrels producing barrels at their old address but Geoffrey Kolbe has sold the company to Birmingham Gunmakers. Kolbe...

   Liked On: 16-04-2016, 02:35 PM

7. 
   Tommy liked post by zimmer On thread : Cracked it

   The red dot is always the last shot fired, to distinguish it from the older shots. If Cyclops had fired a further shot the new shot would have been indicated by a red dot and the previous shot...

   Liked On: 11-04-2016, 07:28 PM

8. 
   Mathias liked post by zimmer On thread : What is "ES"

   As already stated low ES doesn't guarantee a good group, conversely high ES doesn't necessarily give a bad group, well at 100yds at any rate. High ES will certainly affect vertical though at extreme...

   Liked On: 11-04-2016, 06:24 PM

9. 
   R93 liked post by zimmer On thread : What is "ES"

   As already stated low ES doesn't guarantee a good group, conversely high ES doesn't necessarily give a bad group, well at 100yds at any rate. High ES will certainly affect vertical though at extreme...

   Liked On: 11-04-2016, 01:52 PM

10. 
    jakewire liked post by zimmer On thread : Oiled stock

    I would be careful about what I would apply to your stock given its value. As it already has a finish on it adding other finishing products may not be the best thing to do. I have used Birchwood...

    Liked On: 10-04-2016, 06:32 PM

11. 
    Tommy liked post by zimmer On thread : How about this for quality control??!!

    Why not? If others can learn from mistakes..... Was present on a range when a guy fired his rifle (yes it actually fired) and then he couldn't open the bolt. Had to take rifle to smith to get...

    Liked On: 07-04-2016, 08:46 AM

12. 
    Rich007 liked post by zimmer On thread : Suppressor Recoil Reduction Testing???

    With all due respect to Dan who appears to make great stuff (including now, from personal experience, barrels) did he say whether he had purchased/borrowed an example of each of his competitors'...

    Liked On: 06-04-2016, 07:14 PM

13. 
    10-Ring liked post by zimmer On thread : Loctite question

    Yeh on one hunt to the Godley a guy in our team discovered his bases loose - bloody criminal. I use loctite on base screws, sometimes cross screws but never ever ring screws. Also, after I fit a...

    Liked On: 06-04-2016, 12:13 PM

14. 
    7mmsaum liked post by zimmer On thread : Best chainsaw.

    Back in my young (idiotic?) day a mate and I used to do clear felling every weekend. Usually shitty macrocarpras (widow makers), usually on roadside boundaries with either power or telephone lines...

    Liked On: 04-04-2016, 12:24 PM

15. 
    Kscott liked post by zimmer On thread : Loctite question

    Yep 243 is the one I have always used not just on firearms but for general engineering as well. Medium strength and can be removed with tools. No heat required which is the case with the higher...

    Liked On: 03-04-2016, 03:59 PM

Page 162 of 174 First ... 62112148149150151152153154155156157158159160161162163164165166167168169170171172173174 Last

• Jump to page: