Gordon's tool does the sameand it's free to download.
Liked On: 14-01-2022, 09:03 PM
And always confirm a new rifle's performance b4 lopping the barrel. So often I see new rifles lopped before even being fired. Once lopped forget about taking the rifle back to the shop if there are...
Liked On: 14-01-2022, 08:22 PM
And always confirm a new rifle's performance b4 lopping the barrel. So often I see new rifles lopped before even being fired. Once lopped forget about taking the rifle back to the shop if there are...
Liked On: 14-01-2022, 06:09 PM
And always confirm a new rifle's performance b4 lopping the barrel. So often I see new rifles lopped before even being fired. Once lopped forget about taking the rifle back to the shop if there are...
Liked On: 14-01-2022, 06:07 PM
I renembet in my late teens attending my local NZDA branch monthly meeting at which a taxidermist was the guest presenter. To kick of he asked if there were any questions. Someone asked him how...
Liked On: 11-01-2022, 08:59 AM
Here's some comparisons - Ugly - pretty hard to tell exactly but timing his video it was 9secs/case, 400/hour. Bit hard to tell whether the video was showing it fully set up or just running a...
Liked On: 10-01-2022, 08:08 PM
I think with that length of bad bore your accuracy will definitely suffer. Bulges are a bit different. One of the most accurate 22s I shot was a BSA with a bulge 1/2 way down the barrel. Bulges...
Liked On: 09-01-2022, 10:17 PM
No, but I can see at least one forum member who shot today and assume he will be there for the rest of the week. So, plenty of interest for me. Probably other forum members there as well.
Liked On: 09-01-2022, 09:08 PM
Other than using Burris Sig Zees or Optilocs lapping may minimise marking. With the crappy CZ rings that came with my 527 I put 2 layers of gladwrap on the scope. I have never removed the scope...
Liked On: 08-01-2022, 10:18 PM
187410
Liked On: 08-01-2022, 02:05 PM
Results. Usually updated late afternoon, early evening. https://www.nranz.com/results-2/event-reports/2022-national-championships-results/
Liked On: 08-01-2022, 01:53 PM
May not be relevant to your situation but this is the solution I used to mount a Weaver 1" scope on my BRNO ZKW465. I didn't wish to remove the rear sight (and then lose it as is the norm). So to get...
Liked On: 07-01-2022, 09:55 AM
May not be relevant to your situation but this is the solution I used to mount a Weaver 1" scope on my BRNO ZKW465. I didn't wish to remove the rear sight (and then lose it as is the norm). So to get...
Liked On: 07-01-2022, 09:04 AM
Watched his youtube vid last night. He and the annealer came across quite well (no I don't know him at all). He posts his number in the vid as well. It seems to me if the unit is a good un, and...
Liked On: 05-01-2022, 09:33 AM
Other than using Burris Sig Zees or Optilocs lapping may minimise marking. With the crappy CZ rings that came with my 527 I put 2 layers of gladwrap on the scope. I have never removed the scope...
Liked On: 03-01-2022, 02:01 PM