You're right about luck of draw with the 455. I got an absolute lemon. Everything about it was nice, it just wouldn't shoot decent groups. Tried everything short of changing the barrel all to no...
Liked On: 30-10-2020, 07:45 PM
One point, everyone seems to shoot ladder testing at the same aiming mark with the results being on a vertical plane. There is no reason at all why the test cannot be done horizontally using a string...
Liked On: 30-10-2020, 01:20 PM
Shoot them over a chrony. On many occasions with the start of load development I have ceased firing a load after only a couple of shots when the velocity wasn't what I was expecting (ie too low). ...
Liked On: 30-10-2020, 01:17 PM
Find a decent gunsmith in your area, with borescope, and get him to give it a going over. Throat, general barrel, crown area. Mitch Maxberry? At this stage you don't have enough info to make a...
Liked On: 29-10-2020, 09:09 PM
One point, everyone seems to shoot ladder testing at the same aiming mark with the results being on a vertical plane. There is no reason at all why the test cannot be done horizontally using a string...
Liked On: 29-10-2020, 04:26 PM
Shoot them over a chrony. On many occasions with the start of load development I have ceased firing a load after only a couple of shots when the velocity wasn't what I was expecting (ie too low). ...
Liked On: 29-10-2020, 02:38 PM
Yep except I think there has been a delay with his 7mm blanks.
Liked On: 27-10-2020, 12:25 PM
Ultimately it is air density is what affects bullet drag. This article is one of the best I have read that simply explains what happens and what inputs were needed. Absolute air pressure is...
Liked On: 25-10-2020, 07:58 AM
Ditto
Liked On: 21-10-2020, 09:01 PM
https://www.nzherald.co.nz/nz/group-of-people-get-stuck-trying-to-cross-river-near-mt-cook-in-a-truck/VBXJWIDGYAEY2HPBCUH5FKOAMM/
Liked On: 20-10-2020, 06:29 PM
https://www.nzherald.co.nz/nz/group-of-people-get-stuck-trying-to-cross-river-near-mt-cook-in-a-truck/VBXJWIDGYAEY2HPBCUH5FKOAMM/
Liked On: 20-10-2020, 04:43 PM
https://www.nzherald.co.nz/nz/group-of-people-get-stuck-trying-to-cross-river-near-mt-cook-in-a-truck/VBXJWIDGYAEY2HPBCUH5FKOAMM/
Liked On: 20-10-2020, 01:39 PM
Tested my RAT today. Perfect operation. No false triggering when slamming bolt shut like some on the market apparently do. Will solve the issue of false triggering from other shooters nearby. ...
Liked On: 19-10-2020, 11:01 PM
I read the sniperhide posting and I don't think he is quite on to his problem. He did mention CC 450 primers which are a known solution for piercing with for example Federal 200s but he still has the...
Liked On: 15-10-2020, 09:22 PM
Just to confuse.. Definitions of the angular mil There are 2000π milliradians (≈ 6283.185 mrad) in a circle; thus a milliradian is just under 1⁄6283 of a circle, or ≈ 3.438 minutes of arc....
Liked On: 13-10-2020, 06:18 PM