With the ring around it it looks like an earlier Redding. Have you calculated your bushing required? Measure neck wall thickness (not always that accurate using a vernier) multiply by 2, add .264,...
Liked On: 11-10-2020, 12:39 PM
What is the outer diameter of length of the bushing in the photo? According to Mr google Hornady bushing dies will take Redding or Wilson bushings.
Liked On: 11-10-2020, 12:39 PM
Just to confuse.. Definitions of the angular mil There are 2000π milliradians (≈ 6283.185 mrad) in a circle; thus a milliradian is just under 1⁄6283 of a circle, or ≈ 3.438 minutes of arc....
Liked On: 10-10-2020, 01:16 PM
When I last looked Reloaders had one all complete and ready to go. 2k IIRC. Yanks are raving about them particularly as a cheaper alternative to Vudoo V22s. Have a squizz on the RimfireCentral...
Liked On: 09-10-2020, 03:02 PM
Back in my BP days many many moons ago I seriously lusted after a PH Volunteer or a PH Whitworth. I couldn't afford either at the time. Over time though I did end up with an 1858 and an 1861. The...
Liked On: 09-10-2020, 11:48 AM
Condolences likewise MD. A shite experience. I still clearly remember the day our Shepherd took her last trip to the vet. My wife, myself and our 2 kids bawled our eyes out. Not afraid to admit...
Liked On: 07-10-2020, 06:16 PM
The bad news is all optical chronographs are affected by varying light. Using infra red back lighting can eliminate the issue but I found even with infra red lighting stray sun lighting can create...
Liked On: 07-10-2020, 02:16 PM
The bad news is all optical chronographs are affected by varying light. Using infra red back lighting can eliminate the issue but I found even with infra red lighting stray sun lighting can create...
Liked On: 07-10-2020, 10:44 AM
Yep, the M2 lets you upload to you PC. If you want to do that. IIRC CED has its own PC app. I did upload with my M2 and do with my current chrono. With my old F1 I just wrote the numbers down as I...
Liked On: 07-10-2020, 10:12 AM
The bad news is all optical chronographs are affected by varying light. Using infra red back lighting can eliminate the issue but I found even with infra red lighting stray sun lighting can create...
Liked On: 07-10-2020, 09:31 AM
Not alignment but I used to check the strap tightness on mine for the first 3 or 4 shots. This after having mine come loose after maybe 10 shots. At least it drooped down and wasn't at risk of a hit.
Liked On: 05-10-2020, 06:40 PM
Not alignment but I used to check the strap tightness on mine for the first 3 or 4 shots. This after having mine come loose after maybe 10 shots. At least it drooped down and wasn't at risk of a hit.
Liked On: 04-10-2020, 07:00 PM
Sorry, don't quite understand your question. You mention collet but your die would not seem to be a Lee Collet die. Is it an early Hornady die in which case woods223 is on to it with bottoming out? ...
Liked On: 03-10-2020, 09:26 PM
I'll keep you in mind. Anyone looking for factory ammo this guy has some but only SP, no FMJ. https://ammodirect.co.nz/product-category/7.5x55-Swiss/ Also checked with the NZ Sellier and Bellot...
Liked On: 01-10-2020, 08:40 PM
I have shot mine with the service (open sights), diopter sights, and with a side mounted 4x scope. Somewhere on Google (there is a huge amount of Swiss rifle stuff available) there is an article...
Liked On: 01-10-2020, 08:40 PM