NRANZ National's are on all next week. Go and have a look. Although a club day would better for talking to people. Can view here https://wmac.org.nz/about-us/where-we-fly/trentham-weather/ bottom...
Liked On: 08-01-2021, 05:25 PM
Many years ago I had another hunter take a shot at me. The shot smacked into the papa bank just in front of me. We were in shitty manuka at the time. I immediately fired a shot into the air. A...
Liked On: 08-01-2021, 01:12 PM
Correct. And even quality cases like Lapua and Peterson have variation. My last lot of those 2 brands in 308 displayed around 0.3 thou variation albeit a very narrow band. One of the worst in the...
Liked On: 08-01-2021, 12:45 PM
Many years ago I had another hunter take a shot at me. The shot smacked into the papa bank just in front of me. We were in shitty manuka at the time. I immediately fired a shot into the air. A...
Liked On: 08-01-2021, 12:10 PM
In general I load ammo a couple of days b4 I intend firing it. I have no old ammo so no pone tial for sticking. I did however dig out some 10 year old 223 reloads recently and fire those. Velocities...
Liked On: 06-01-2021, 08:37 AM
Correct name should be Concentricity Tool And Consistant Neck Tension Destroyer :P
Liked On: 05-01-2021, 05:55 PM
When I was a kid the predominant air rifle around was the Meteor (introduced 1959) but also common were Gecados. Some Falkes also. I was too young to own my own then so used to go around to an old...
Liked On: 04-01-2021, 06:40 PM
Yeah had a look at his website. The die is not to be confused with the Lee Collet die which resizes the neck. As the OP points out, this die sizes the area just above the shoulder. Looks to be a...
Liked On: 04-01-2021, 05:16 PM
When I was a kid the predominant air rifle around was the Meteor (introduced 1959) but also common were Gecados. Some Falkes also. I was too young to own my own then so used to go around to an old...
Liked On: 04-01-2021, 11:54 AM
Correct name should be Concentricity Tool And Consistant Neck Tension Destroyer :P
Liked On: 04-01-2021, 10:02 AM
Yeah had a look at his website. The die is not to be confused with the Lee Collet die which resizes the neck. As the OP points out, this die sizes the area just above the shoulder. Looks to be a...
Liked On: 03-01-2021, 06:09 PM
Yeah had a look at his website. The die is not to be confused with the Lee Collet die which resizes the neck. As the OP points out, this die sizes the area just above the shoulder. Looks to be a...
Liked On: 03-01-2021, 04:56 PM
Yeah had a look at his website. The die is not to be confused with the Lee Collet die which resizes the neck. As the OP points out, this die sizes the area just above the shoulder. Looks to be a...
Liked On: 03-01-2021, 02:25 PM
I have just read that with no tourists this year the road toll is virtually unchanged. Shit, who are we going to blame now?
Liked On: 31-12-2020, 06:03 PM
Hornady's pathetic zip lock system. The shaft locks by friction. All other die manufacturers have threaded rods with threaded locking nuts or rings. On the Hornady there are are series of thread like...
Liked On: 30-12-2020, 12:12 AM