zimmer
Member

2535 Likes

Page 99 of 169 First ... 49858687888990919293949596979899100101102103104105106107108109110111112113149 ... Last

• Jump to page:

1. 
   Micky Duck liked post by zimmer On thread : Keeping it Simple for New Handloaders

   Just to reinforce the GPM's KISS principle. For my first 15 years of handloading (308 and treble 2) I used a Lyman 310 handtool. (Google it) I had a second hand first model Redding beam balance with...

   Liked On: 19-12-2020, 08:32 PM

2. 
   Dama dama liked post by zimmer On thread : Keeping it Simple for New Handloaders

   Just to reinforce the GPM's KISS principle. For my first 15 years of handloading (308 and treble 2) I used a Lyman 310 handtool. (Google it) I had a second hand first model Redding beam balance with...

   Liked On: 19-12-2020, 12:37 PM

3. 
   Luke777 liked post by zimmer On thread : Fireforming case with cleaning patches and pistol powder

   I was looking at this a month or so back. Whidden want a schematic or 3 cases whilst Hornady seem to infer they want both the schemical and cases. Was looking at what I'll do when my current cases...

   Liked On: 18-12-2020, 08:57 PM

4. 
   Nakivet liked post by zimmer On thread : Keeping it Simple for New Handloaders

   Just to reinforce the GPM's KISS principle. For my first 15 years of handloading (308 and treble 2) I used a Lyman 310 handtool. (Google it) I had a second hand first model Redding beam balance with...

   Liked On: 18-12-2020, 01:04 PM

5. 
   Bos liked post by zimmer On thread : Keeping it Simple for New Handloaders

   Just to reinforce the GPM's KISS principle. For my first 15 years of handloading (308 and treble 2) I used a Lyman 310 handtool. (Google it) I had a second hand first model Redding beam balance with...

   Liked On: 18-12-2020, 01:04 PM

6. 
   grandpamac liked post by zimmer On thread : Keeping it Simple for New Handloaders

   Just to reinforce the GPM's KISS principle. For my first 15 years of handloading (308 and treble 2) I used a Lyman 310 handtool. (Google it) I had a second hand first model Redding beam balance with...

   Liked On: 18-12-2020, 10:33 AM

7. 
   Luke777 liked post by zimmer On thread : 243 Ackley. Project getting closer, experiences and advice welcomed

   I neck pre-turned my 6.5x55 SM brass for my AI but not primarily to prevent donuts but due to very tight neck (ridiculously tight) clearance which was fashionable at the time. I did cut into the...

   Liked On: 18-12-2020, 12:45 AM

8. 
   Luke777 liked post by zimmer On thread : 243 Ackley. Project getting closer, experiences and advice welcomed

   Luke, I see on your other posting you are neck turning your new Lapua brass. Is this just to tidy it up or are you turning for a clearance based on your reamer drawing?

   Liked On: 18-12-2020, 12:45 AM

9. 
   shooternz liked post by zimmer On thread : Auto powder dispensers

   I used an RCBS Uniflow thrower for years. Dispensed just under and finished with a trickler on my old Ohaus D5 beam scales. With the Uniflow like any thrower it is all about consistant technique/how...

   Liked On: 16-12-2020, 09:35 AM

10. 
    Micky Duck liked post by zimmer On thread : Stuck case removal tool Sth Taranaki?

    Usually..........with the right gear they come out amazingly easy. Even easier than pulling a tooth.

    Liked On: 15-12-2020, 08:59 PM

11. 
    Tim Dicko liked post by zimmer On thread : Any one seating bullets using a graphite powder?

    In general I load ammo a couple of days b4 I intend firing it. I have no old ammo so no pone tial for sticking. I did however dig out some 10 year old 223 reloads recently and fire those. Velocities...

    Liked On: 15-12-2020, 08:45 PM

12. 
    Moa Hunter liked post by zimmer On thread : Stuck case removal tool Sth Taranaki?

    Usually..........with the right gear they come out amazingly easy. Even easier than pulling a tooth.

    Liked On: 15-12-2020, 07:25 PM

13. 
    Moa Hunter liked post by zimmer On thread : Any one seating bullets using a graphite powder?

    In general I load ammo a couple of days b4 I intend firing it. I have no old ammo so no pone tial for sticking. I did however dig out some 10 year old 223 reloads recently and fire those. Velocities...

    Liked On: 15-12-2020, 10:48 AM

14. 
    distant stalker liked post by zimmer On thread : Auto powder dispensers

    F Class John did a review of the Frankford. IIRC it was on accurateshooter.com. Maybe he he also did a youtube clip, I haven't checked. He said tuning it to the powder he was using gave a dispense...

    Liked On: 14-12-2020, 10:15 PM

15. 
    charliehorse liked post by zimmer On thread : Newby wannabe reloader part 2

    Best advice posted so far. OP needs to go around to someone's place and have a play, even take his own gear and get help with setup. Press on a piece of timber and a couple of G clamps. I could...

    Liked On: 13-12-2020, 10:48 PM

Page 99 of 169 First ... 49858687888990919293949596979899100101102103104105106107108109110111112113149 ... Last

• Jump to page: