Looking for "bags" of 1000 62gr FMJs or 55gr FMJs projectiles or even 5000 if a big discount is involved, (for plinking / practice) thanks.
Type: Posts; User: steven
Looking for "bags" of 1000 62gr FMJs or 55gr FMJs projectiles or even 5000 if a big discount is involved, (for plinking / practice) thanks.
Where is good to get 1000 ~ 2000 223r FMJs (AR15) with good reloadable brass these days?
For my Stag Model 4 rifle (ie a service grade 20inch barrel) the 77gr TMK was comfortably under 3/4inch at around max load and is the most accurate load I have developed so far. Once above max load...
ie long, high quality barrel's options with scopes setup for long range shooting.
I sometimes think Pollies go out of their way to make themselves look stupid. All its takes is a quiet common sense chat with a pet FAL holder, gunsmith or say COLFO to get any idea how stupid an...
What does 6 inch / 155mm pipe cost per metre?
In theory if I alter a dimension in CAD its reflected in the part, however sometimes the result is, um totally wierd....
The OD is 158mm with a...
The base plate, wall and collator plate each take about 16 hours to print. The small stuff as little as 45mins. For later mods the base and wall will probably get joined just for testing when I...
maybe this?
https://www.youtube.com/watch?v=00OBICOTmCk
If that fails youtube search gzcwnk and look for the video....
Still a work in progress but showing some promise. ADI 62gr 223 FMJs in this case.
https://www.youtube.com/edit?o=U&video_id=00OBICOTmCk
I tried to get a revolving one going and the arduino electronics worked great but the mechanical feed and heating, just not. I have been thinking of trying something like this....
I load, 55gr, 62gr, 69gr and 77gr for my AR15.
I started with ADI2208/Varget but found it metered poorly, 0.2 +/- or even 0.4 +/- on occasion My best accuracy 3/4MOA is above the max load so a bit...
On what? barrel end?
Do you own a digital calipers?
If so measure the OD and count how many threads per inch / 25mm there are. If you only have 10mm of threaded end how many threads per that...
Hi All,
If interested,
Good morning FCAF members
"In Police’s effort to review and improve the administration of the Arms Act, the Arms Act Service Delivery Group is looking closely at...
Seems more than a few US gun companies are geared up to only be profitable when a democrat is in the Whitehouse. Put a Republican in and a) the fear of losing their guns goes and b) the country...
Yes I use Placemakers. Yes, he could probably get you a discount.
I use 2 pak epoxy off Placemakers, Norski epoxy filler about $32. I release it with Turtle car wax and apply that with cotton buds. I use masking tape to keep it off things not being stuck. Its...
I tried to get a burner one going and while the electronics worked great the mechanical feeding was flaky. I have wondered about using a case collator dropping into something like this with a...
Sorry no idea who you are and PM's dont work.
On and get a powder trickler I suggest. A metal RCBS one (or simialr) so they dont get knocked over easily.
Yes.
Dont trust cheap digital scales without a cross check. I had a hornady one and it progressively under read getting worse over time, result 38gr of 2208 became 47gr of 2208 and it stretched...
Depending on your needs a reloading setup will cost about $700. If you plan on reloading a few hundred rounds per year then I assume you really want to keep costs under control.
If loading...
Tried it, shoots terribly, both the projectiles and ammo + I want the brass to reload.
Also 1000rnds ready loaded 223?
Target shooting is very much going depend on the condition of your barrel (and its bedding). The 303brit SMK is over $1 a go but should work in a good barrel. Other options is try 308w HPBT, even...