Cheers guys,thank you
Type: Posts; User: Skeetshooter
Cheers guys,thank you
I know buying a gun is now a triggering event for registration, but is the seller of that gun now up for registration as well,?
I enquired from them cple yrs back about importing a pro series,
They told me they only bring in one lot of guns prior to duck shooting season, and had no interest in adding a one off to the...
Perazzi need to get there act together re manufacturing techniques , well know there barrel solderering of ribs needs improvement, other manufacturers are brazing barrels and ribs whilst perrazi...
Unknown at this stage,
Aiming for it to be subsonic, From the Lyman cast bullet book that load should be approx 950 fps,that's based on the data for same bullet in 32 20,
That 2.2 grns half fills...
Forming cases and loading for the .30 badger,
Loading 2.2 grns of 700x, 175 grn cast sized to .309.
Project rifle nearly finished, waiting for the shops to open tomorrow to buy a 11mm end mill to...
I would expect to pay maybe 3k for a tidy set of 30in,some people may say briley chokes devalue but I'm not one of those people,
In my experience not all barrels will interchange.
I had 5 mx8...
Another option,
There's an out fit in Oz that sell yildiz pro guns, exact copy of the mx8,
Barrels fit straight in so I'm told,
I have 3 spare pair here but 30in not 32, but I'm a hoarder
Have you tried Les clark? He's the perazzi bits man
Further to my post below,
Re importing projectiles for above from the USA,
Any body loading with a projectile available in nz?
Bore is .316,looking for around 175 grains.
Have an offer possibly ...
Hi
I haven't discussed that with him but I doubt he needs many shots thru it
Xx
I have cast .303 projectiles here.
They push into the bore with finger pressure would never take the rifling.
Well unlikely I'm thinking
I see reloaders have a .324 dia 175grn mould available.
Probably as good as it gets.
Can size down as necessary
Thanks Leslie
An old mate has been given an old German rifle in 8.15 x 46R
He's determined to fire it.
Buffalo arms have the required projectiles and or the mould.
But I hear what you are...
Has any body imported projectiles from the USA recently?
If so any problems?
No import permit required I'm presuming?
I'm wanting 1 pkt of 50 from Buffalo arms⁶
244271244272244273244274
.22 in my opinion makes a good display?
Because they are smallish compared to say shotshell pkts, I have a box of .22 I'll find and put up a pic.
My main interest is shot shell boxes, I display...
Chch, has a very good following at the club
Loading 45acp, going to try a light load of4 grns 700x behind a cast 200 grn semi wadcutter, for approx 750fps.
These will be shot from a mod 625 S&W for NRA comp
Realistically, if you put the correct amount of the correct powder behind the correct amount of lead shot you won't have any issues.
The interchange of felt wads for plastic wads won't be an...
I can not see how you aren't asking for trouble with that set up if you aren't useing plastic wads? Uncontained shot coloum travelling down a ported barrel can't be good surely.
When loading...
Is there a reason you don't want to go with plastic cases?
I reload 410 on a mec 650 press for shooting skeet,
It's not hard to get your head around, certainly easier than loading rifle.
The only wads you will come across will be one piece plastic,I...