I agree. Tune mv to match real world. Should only be a few tenths out, otherwise something more serious is wrong e.g. zero or environmentals
True BC if I have access to significant sub-sonic range...
Type: Posts; User: chalkeye
I agree. Tune mv to match real world. Should only be a few tenths out, otherwise something more serious is wrong e.g. zero or environmentals
True BC if I have access to significant sub-sonic range...
I am probably 500 rounds in. It started slower but seems to be stabilizing mv now.
I think I got one of the last barreled actions in 6 creedmoor. The barrel is astonishingly slow (~2880 FPS with 41.6gr 2209) but is very accurate.
211195
211196211198211199211201211200
Magnetospeed or Labradar. Optical chronos just aren't trustworthy in my experience
Thanks. That must be from the membership content area? I still can't find it anywhere online.
Regardless, I stand by my point that most people aren't controlling MV tight enough to gather...
Where does Erik suggest this? I've just had a quick skim through some videos but couldn't find this.
Looking for MV flat spots when your ES is ~80 FPS is a waste of time. In my experience most "flat...
I can't reach the lands with even 140 eldm's in my Howa.
e.g. at some point the projectile is not contacting the neck or the lands!
Shoots fine
https://guns.ptosis.ch/ru/node/1
Staying Friday and Saturday nights in Fairlie
I'll be heading up from Dunedin for my first comp. If there's any chance of a ride from Fairlie on the Saturday that would be much appreciated!
Been meaning to do this for ages - sick of cramped and lightweight loading trays. Pouring all day yesterday so fired up the CNC router on some scrap rimu:
136875
Thanks all. All of the scales in my house are broken so I can't weigh it - I'm hoping it'll be around a kilo. I'll confirm once I get my hands on some real scales though!
CAM is all done within...
Haven't posted in a while.
Been working on an updated stock design for ages, finally got my ducks lined up to make another prototype.
I bought a used CNC router off a farmer in Gore for a steal and...
I run 55gr Sierra HPBT's over BM2 in my LSA 55
that's a good hustle for 150 grains. I like the look of the 300 PRC too.
I have mine at 20", and push a 143gr at 2740 fps.
Right you are McNotty
Duolight? Thoughts?
OAL is the total length of the loaded cartridge (base of brass to tip of projectile).
SAAMI standard length for 6.5x55 is 80mm, but if you're handloading you can seat bullets out to whatever length...
If only he hadn't gone hunting that one time
https://www.youtube.com/watch?v=M6hCwAXV6S8&feature=youtu.be
What's the good word on that scope?
Dream result. Congratulations.
Who sells RL 16 in NZ?
clean chamber, dirty barrel