Thankfully a simple remedy and cause and my suspicion was right.
Wiped the cases on a cloth thoroughly before firing today both with and without suppressor. No pressure signs at all and easy bolt...
Type: Posts; User: Makros
Thankfully a simple remedy and cause and my suspicion was right.
Wiped the cases on a cloth thoroughly before firing today both with and without suppressor. No pressure signs at all and easy bolt...
My thoughts exactly - I'll do some testing this weekend and see what is going on.
Was cleaned with Boretech eliminator prior to going out (I could see copper and I'm roughly following the break in procedure form the manufacturer so I cleaned back to sparkling clean). Then dry...
Same load and same batch of reloads (made at the same time) I've previously fired without suppressor. I might take it to the range this weekend though an try with the suppressor and without under the...
I sorted out a preliminary load for my reasonably new 6.5PRC (sub 100 rounds), 53.5grn of H4831sc which is 1.2 grain under Hornady published max. This load showed the best accuracy with 143 grn ELD-x...