Search:

Mine is one of only two working centerfire rifles I have that isn't bedded , It is just as it came. shoots very well.
The other incase your wondering is my 30 30.:)

Good stuff, look forward to that.

I would say not but, it would be good to keep the 9.3 thread alive.

Its a 1962 made Husqvarna 1640 JohnDuxbury
191076

I ended up at 65.3 of 2209. have to use a drop tube as very compressed, and now that I have a decent chrony not going as fast as I first thought, accurate though and as that's what I like it will do...

My 65 gr flat of 2209 load gave me just under 2400 two shots an inch apart at 100m then adjusted for a 3" high zero and Gimp and I took a shot each at at steel plate 200yrds away, both hits nearish...

I have 64 min and 67 max with 2209, seems 2300 to about 2410
not hung up on 2209 , just thats what I have the most of.
Low pressure for first time reloads in an old rifle with a bore the size i can...

Well with the varget there would be plenty more room in the case
I'll shoot these and if nothing promising will report here and pm you. Thanks for that.

Thanks for that Stug, was hoping you'd chime in.
I'll have a read of that.
I was hoping to use what I had re the ADI's, but may have to go further.
I'd be happy with an accurate 2350 to 2400, set...

So ,after a bit of a false start [the dummy rd jammed the neck right back against the shoulder]
Duh, so
I cleaned out the dies and F/L sized and chamfered the remaining 49 lapua brass.
No issues...