Search:

Looks like a great product. What is the turnaround time?

Thx for all the feedback. Rifle was in a Caldwell lead sled with the fore end sitting perhaps a third the way between the action and the end. Was in a McMillan stock that has been recently bedded...

There is evidence of a bullet strike at the muzzle. I think it did some time on an AR15 at some point. I don’t love the muzzle forward design, -makes the rifle long and front heavy. Would be ok on a...

Bought a well used (800 rounds) Tikka T3 223 1/8 last week. It came with a muzzle-forward Dpt suppressor that the seller described as “free” because it was “not suited for long range work”. I started...

I had one but found i left it on 3 most of the time in the bush. I thought i would zoom down to 1 in tight bush and shoot animals that jumped up at my feet but it never happened. Zooming out in tight...

You should be fine with the one peice rings but it might be affected by the action length. I know it will fit on a magnum, - could be different on a shorter action.

Sorry to highjack the thread (a little). I understand that the high BC projectiles extend the range of short barrelled rifles but how do they perform for the 50-150 yard shots that tend to be the...

Through NZ Asia, the NZ agent. Sent it to them in Nelson at my cost, they sent it to ‘Oz, got the work done and returned it to me for $320ish. Took about a month. The bonus was it came back as a ZL2...

I have an early vx6 with an older style non- ZL cds system that had to sent to Australia to get the ZL cds added. Works great though...

I got a Beretta one through Christchurch Hunting and Fishing, -$120 ish. It was for a Beretta 692 which i think has the extended HP chokes.

Ive not had a zeiss 1-4, but had a kahles 1-4 and found the x4 end of the zoom a little underwhelming (in terms of magnification) given the size and bulk of the scope. A light weight compact 1-4 is...

Not much point going below 2-ish power if you have a supressor as it blocks out much of the view at full-wide. I really like the look and balance of straight tube scopes such as the vx-r 1.25-4 and...

Im getting 2900 with 65g Sierra Gamekings and BM2 out of a 16” T3. Seems fast but tikka7mm08’s labradar must be telling the truth. Fantastic load on fallow.

Thx

CRG85, -where did you find that turret on their site? Does it have a zero stop? Thx

The older ones secured the zero stop with a little sticker. Do a web search on install cds to vx6, -They have a short video on it. The problem is you need a new sticker every time you adjust the...

I read somewhere 15-20 for the rings, 20-25 for the bases. Its what i have used without any problems. When tightening the ring screws with a torque wrench, i end up applying less force than i used...

I have found that winding the Tikka trigger adjustment screw into the heaviest setting, leaving it there for a while, and then winding out to the lightest setting seems to make it lighter.

So do you wet the oats to form a paste or put it in dry and keep everything pointing up until you fire it?

Sorry, dent is in the shoulder.

Carpediem sent me a detailed reply of how to clean and polish the dies. He has had the same trouble with grit in Lee dies.

Vietnamcam, - i just follow the...

I am putting little dents in the case necks when FL resizing. From what I read it could be due to a build up of case lube in the sizing die. I have tried soaking the die in white sprits/petrol to...

WillB i have a swaro 3-9x36 on my Carbonlight, but it is really set up for Stewart Island bush. Weighs about 2910g with ss optilocks (which are not light but are such good rings). My issue with...

No have no weighed the CL stock sorry. Not planning to sell, Cheers Ross

I’m lucky enough to have both a Carbonlight and a Finnlight II. Both great rifles but I reckon the Carbonlight is a little on the light side for an all rounder. Mine is an unsuppressed 260 and feels...

Happened to me with an Europtic purchase (also Leica binos). I did not notice the email on my ANZ internet banking page (who checks their bank email!). Because I did not respond the bank cancelled...